MachineIdentities

All URIs are relative to https://sailpoint.api.identitynow.com

Method	HTTP request	Description
New-MachineIdentityV1	POST `/machine-identities/v1`	Create machine identity
New-MachineIdentityV2	POST `/machine-identities/v2`	Create machine identity
Remove-MachineIdentityV1	DELETE `/machine-identities/v1/{id}`	Delete machine identity
Remove-MachineIdentityV2	DELETE `/machine-identities/v2/{id}`	Delete machine identity
Remove-OwnershipCorrelationConfigV1	DELETE `/sources/v1/{sourceId}/resources/{resourceId}/correlation-configs/{configId}`	Delete ownership correlation config
Get-MachineIdentityV1	GET `/machine-identities/v1/{id}`	Get machine identity details
Get-MachineIdentityV2	GET `/machine-identities/v2/{id}`	Get machine identity details
Get-OwnershipCorrelationConfigV1	GET `/sources/v1/{sourceId}/resources/{resourceId}/correlation-configs/{configId}`	Get ownership correlation config
Get-MachineIdentitiesV1	GET `/machine-identities/v1`	List machine identities
Get-MachineIdentitiesV2	GET `/machine-identities/v2`	List machine identities
Get-MachineIdentityUserEntitlementsV1	GET `/machine-identity-user-entitlements/v1`	List machine identity's user entitlements
Get-OwnershipCorrelationConfigsV1	GET `/sources/v1/{sourceId}/resources/{resourceId}/correlation-configs`	List ownership correlation configs
Update-OwnershipCorrelationConfigV1	PATCH `/sources/v1/{sourceId}/resources/{resourceId}/correlation-configs/{configId}`	Patch ownership correlation config
Start-MachineIdentityAggregationV1	POST `/sources/v1/{sourceId}/aggregate-agents`	Start machine identity aggregation
Update-MachineIdentityV1	PATCH `/machine-identities/v1/{id}`	Update machine identity details
Update-MachineIdentityV2	PATCH `/machine-identities/v2/{id}`	Partial update of machine identity

create-machine-identity-v1

experimental

This API is currently in an experimental state. The API is subject to change based on feedback and further testing. You must include the X-SailPoint-Experimental header and set it to true to use this endpoint.

Use this API to create a machine identity. The maximum supported length for the description field is 2000 characters.

API Spec

Parameters

Param Type	Name	Data Type	Required	Description
XSailPointExperimental	String	True (default to "true")	Use this header to enable this experimental API.
Body	MachineIdentityRequest	MachineIdentityRequest	True

Return type

MachineIdentityResponse

Responses

Code	Description	Data Type
200	Machine Identity created.	MachineIdentityResponse
400	Client Error - Returned if the request body is invalid.	ErrorResponseDto
401	Unauthorized - Returned if there is no authorization header, or if the JWT token is expired.	ListMachineIdentitiesV1401Response
403	Forbidden - Returned if the user you are running as, doesn't have access to this end-point.	ErrorResponseDto
404	Not Found - returned if the request URL refers to a resource or object that does not exist	ErrorResponseDto
429	Too Many Requests - Returned in response to too many requests in a given period of time - rate limited. The Retry-After header in the response includes how long to wait before trying again.	ListMachineIdentitiesV1429Response
500	Internal Server Error - Returned if there is an unexpected error.	ErrorResponseDto

HTTP request headers

Content-Type: application/json
Accept: application/json

Example

$XSailPointExperimental = "true" # String | Use this header to enable this experimental API. (default to "true")
$MachineIdentityRequest = @"{
  "sourceId" : "6d28b7c1-620c-49c6-b6d5-cbf81eb4b5fa",
  "subtype" : "Application",
  "created" : "2015-05-28T14:07:17Z",
  "userEntitlements" : [ {
    "sourceId" : "5898b7c1-620c-49c6-cccc-cbf81eb4bddd",
    "entitlementId" : "6d28b7c1-620c-49c6-b6d5-cbf81eb4b5fa"
  }, {
    "sourceId" : "5898b7c1-620c-49c6-cccc-cbf81eb4bddd",
    "entitlementId" : "6d28b7c1-620c-49c6-b6d5-cbf81eb4b5fa"
  } ],
  "name" : "aName",
  "modified" : "2015-05-28T14:07:17Z",
  "description" : "",
  "attributes" : "{\"Region\":\"EU\"}",
  "owners" : {
    "primaryIdentity" : "{}",
    "secondaryIdentities" : [ {
      "name" : "William Wilson",
      "id" : "2c91808568c529c60168cca6f90c1313",
      "type" : "IDENTITY"
    }, {
      "name" : "William Wilson",
      "id" : "2c91808568c529c60168cca6f90c1313",
      "type" : "IDENTITY"
    } ]
  },
  "id" : "id12345",
  "uuid" : "f5dd23fe-3414-42b7-bb1c-869400ad7a10",
  "nativeIdentity" : "abc:123:dddd"
}"@

# Create machine identity

try {
    $Result = ConvertFrom-JsonToMachineIdentityRequest -Json $MachineIdentityRequest
    New-MachineIdentityV1 -XSailPointExperimental $XSailPointExperimental -MachineIdentityRequest $Result 
    
    # Below is a request that includes all optional parameters
    # New-MachineIdentityV1 -XSailPointExperimental $XSailPointExperimental -MachineIdentityRequest $Result  
} catch {
    Write-Host $_.Exception.Response.StatusCode.value__ "Exception occurred when calling New-MachineIdentityV1"
    Write-Host $_.ErrorDetails
}

[Back to top]

create-machine-identity-v2

Use this API to create a machine identity. Additional owners may be either up to ten human (IDENTITY) references or exactly one GOVERNANCE_GROUP reference - not both. The maximum supported length for the description field is 2000 characters.

When Business Applications is enabled for the tenant, callers may optionally include a single businessApplicationRefs entry (type=BUSINESS_APPLICATION, id=BA UUID). The assignment is stored as a MANUAL correlation. correlationType may be omitted or MANUAL; AUTOMATIC is rejected (400). Unknown BA id returns 404. More than one ref returns 400. When Business Applications is not enabled, supplying businessApplicationRefs returns 400. sanctionedStatus and effectiveSanctionedStatus are read-only and ignored on input.

API Spec

Parameters

Param Type	Name	Data Type	Required	Description
Body	Machineidentityv2	Machineidentityv2	True

Return type

Machineidentityv2

Responses

Code	Description	Data Type
201	Machine identity created (same schema family as v2 GET/PATCH).	Machineidentityv2
400	Client Error - Returned if the request body is invalid.	ErrorResponseDto
401	Unauthorized - Returned if there is no authorization header, or if the JWT token is expired.	ListMachineIdentitiesV1401Response
403	Forbidden - Returned if the user you are running as, doesn't have access to this end-point.	ErrorResponseDto
404	Not Found - returned if the request URL refers to a resource or object that does not exist	ErrorResponseDto
429	Too Many Requests - Returned in response to too many requests in a given period of time - rate limited. The Retry-After header in the response includes how long to wait before trying again.	ListMachineIdentitiesV1429Response
500	Internal Server Error - Returned if there is an unexpected error.	ErrorResponseDto

HTTP request headers

Content-Type: application/json
Accept: application/json

Example

$Machineidentityv2 = @"{
  "sourceId" : "6d28b7c1-620c-49c6-b6d5-cbf81eb4b5fa",
  "resource" : {
    "features" : [ "PROVISIONING", "AUTHENTICATION" ],
    "name" : "nightly-batch-role",
    "id" : "8886e5e3-63d0-462f-a195-d98da885b8dc",
    "type" : "aws:iam-role"
  },
  "created" : "2015-05-28T14:07:17Z",
  "connectorAttributes" : {
    "objectguid" : "abc-123"
  },
  "description" : "Service account for nightly batch jobs",
  "owners" : {
    "secondary" : [ {
      "id" : "2c9180858082150f0180893dbaf44202",
      "name" : "Jane Doe",
      "type" : "IDENTITY"
    } ],
    "primary" : {
      "name" : "William Wilson",
      "id" : "2c91808568c529c60168cca6f90c1313",
      "type" : "IDENTITY"
    }
  },
  "source" : {
    "name" : "William Wilson",
    "id" : "2c91808568c529c60168cca6f90c1313",
    "type" : "IDENTITY"
  },
  "uuid" : "f5dd23fe-3414-42b7-bb1c-869400ad7a10",
  "nativeIdentity" : "abc:123:dddd",
  "effectiveSanctionedStatus" : "SANCTIONED",
  "environment" : "PRODUCTION",
  "subtype" : "AI_AGENT",
  "businessApplicationRefs" : [ {
    "name" : "Cursor",
    "correlationType" : "MANUAL",
    "id" : "2ee5e239-e68c-4d69-93fb-6c7ce4576190",
    "type" : "BUSINESS_APPLICATION",
    "sanctionedStatus" : "SANCTIONED"
  } ],
  "userEntitlements" : [ {
    "sourceId" : "5898b7c1-620c-49c6-cccc-cbf81eb4bddd",
    "displayName" : "Entitlement Name",
    "entitlementId" : "6d28b7c1-620c-49c6-b6d5-cbf81eb4b5fa",
    "source" : {
      "name" : "William Wilson",
      "id" : "2c91808568c529c60168cca6f90c1313",
      "type" : "IDENTITY"
    }
  }, {
    "sourceId" : "5898b7c1-620c-49c6-cccc-cbf81eb4bddd",
    "displayName" : "Entitlement Name",
    "entitlementId" : "6d28b7c1-620c-49c6-b6d5-cbf81eb4b5fa",
    "source" : {
      "name" : "William Wilson",
      "id" : "2c91808568c529c60168cca6f90c1313",
      "type" : "IDENTITY"
    }
  } ],
  "name" : "aName",
  "modified" : "2015-05-28T14:07:17Z",
  "datasetId" : "8886e5e3-63d0-462f-a195-d98da885b8dc",
  "attributes" : {
    "privilegeLevel" : "HIGH",
    "region" : "APAC"
  },
  "risk" : {
    "severity" : "HIGH",
    "score" : 72.5
  },
  "id" : "id12345",
  "manuallyEdited" : true,
  "manuallyCreated" : true,
  "existsOnSource" : "TRUE",
  "status" : "ACTIVE"
}"@

# Create machine identity

try {
    $Result = ConvertFrom-JsonToMachineidentityv2 -Json $Machineidentityv2
    New-MachineIdentityV2 -Machineidentityv2 $Result 
    
    # Below is a request that includes all optional parameters
    # New-MachineIdentityV2 -Machineidentityv2 $Result  
} catch {
    Write-Host $_.Exception.Response.StatusCode.value__ "Exception occurred when calling New-MachineIdentityV2"
    Write-Host $_.ErrorDetails
}

[Back to top]

delete-machine-identity-v1

experimental

The API returns successful response if the requested machine identity was deleted.

API Spec

Parameters

Param Type	Name	Data Type	Required	Description
Path	Id	String	True	Machine Identity ID
XSailPointExperimental	String	True (default to "true")	Use this header to enable this experimental API.

Return type

(empty response body)

Responses

Code	Description	Data Type
204	No content - indicates the request was successful but there is no content to be returned in the response.
400	Client Error - Returned if the request body is invalid.	ErrorResponseDto
401	Unauthorized - Returned if there is no authorization header, or if the JWT token is expired.	ListMachineIdentitiesV1401Response
403	Forbidden - Returned if the user you are running as, doesn't have access to this end-point.	ErrorResponseDto
404	Not Found - returned if the request URL refers to a resource or object that does not exist	ErrorResponseDto
429	Too Many Requests - Returned in response to too many requests in a given period of time - rate limited. The Retry-After header in the response includes how long to wait before trying again.	ListMachineIdentitiesV1429Response
500	Internal Server Error - Returned if there is an unexpected error.	ErrorResponseDto

HTTP request headers

Content-Type: Not defined
Accept: application/json

Example

$Id = "ef38f94347e94562b5bb8424a56397d8" # String | Machine Identity ID
$XSailPointExperimental = "true" # String | Use this header to enable this experimental API. (default to "true")

# Delete machine identity

try {
    Remove-MachineIdentityV1 -Id $Id -XSailPointExperimental $XSailPointExperimental 
    
    # Below is a request that includes all optional parameters
    # Remove-MachineIdentityV1 -Id $Id -XSailPointExperimental $XSailPointExperimental  
} catch {
    Write-Host $_.Exception.Response.StatusCode.value__ "Exception occurred when calling Remove-MachineIdentityV1"
    Write-Host $_.ErrorDetails
}

[Back to top]

delete-machine-identity-v2

The API returns a successful response if the requested machine identity was deleted.

API Spec

Parameters

Param Type	Name	Data Type	Required	Description
Path	Id	String	True	Machine Identity ID.

Return type

(empty response body)

Responses

Code	Description	Data Type
204	No content - indicates the request was successful but there is no content to be returned in the response.
400	Client Error - Returned if the request body is invalid.	ErrorResponseDto
401	Unauthorized - Returned if there is no authorization header, or if the JWT token is expired.	ListMachineIdentitiesV1401Response
403	Forbidden - Returned if the user you are running as, doesn't have access to this end-point.	ErrorResponseDto
404	Not Found - returned if the request URL refers to a resource or object that does not exist	ErrorResponseDto
429	Too Many Requests - Returned in response to too many requests in a given period of time - rate limited. The Retry-After header in the response includes how long to wait before trying again.	ListMachineIdentitiesV1429Response
500	Internal Server Error - Returned if there is an unexpected error.	ErrorResponseDto

HTTP request headers

Content-Type: Not defined
Accept: application/json

Example

$Id = "ef38f94347e94562b5bb8424a56397d8" # String | Machine Identity ID.

# Delete machine identity

try {
    Remove-MachineIdentityV2 -Id $Id 
    
    # Below is a request that includes all optional parameters
    # Remove-MachineIdentityV2 -Id $Id  
} catch {
    Write-Host $_.Exception.Response.StatusCode.value__ "Exception occurred when calling Remove-MachineIdentityV2"
    Write-Host $_.ErrorDetails
}

[Back to top]

delete-ownership-correlation-config-v1

Deletes the ownership correlation config with the specified ID for the given source resource.

API Spec

Parameters

Param Type	Name	Data Type	Required	Description
Path	SourceId	String	True	The Source ID.
Path	ResourceId	String	True	The source resource ID (for example, account or aws:iam-role).
Path	ConfigId	String	True	The correlation config ID.

Return type

(empty response body)

Responses

Code	Description	Data Type
204	No content - indicates the request was successful but there is no content to be returned in the response.
400	Client Error - Returned if the request body is invalid.	ErrorResponseDto
401	Unauthorized - Returned if there is no authorization header, or if the JWT token is expired.	ListMachineIdentitiesV1401Response
403	Forbidden - Returned if the user you are running as, doesn't have access to this end-point.	ErrorResponseDto
404	Not Found - returned if the request URL refers to a resource or object that does not exist	ErrorResponseDto
429	Too Many Requests - Returned in response to too many requests in a given period of time - rate limited. The Retry-After header in the response includes how long to wait before trying again.	ListMachineIdentitiesV1429Response
500	Internal Server Error - Returned if there is an unexpected error.	ErrorResponseDto

HTTP request headers

Content-Type: Not defined
Accept: application/json

Example

$SourceId = "2c9180835d191a86015d28455b4a2329" # String | The Source ID.
$ResourceId = "aws:iam-role" # String | The source resource ID (for example, account or aws:iam-role).
$ConfigId = "f5dd23fe-3414-42b7-bb1c-869400ad7a10" # String | The correlation config ID.

# Delete ownership correlation config

try {
    Remove-OwnershipCorrelationConfigV1 -SourceId $SourceId -ResourceId $ResourceId -ConfigId $ConfigId 
    
    # Below is a request that includes all optional parameters
    # Remove-OwnershipCorrelationConfigV1 -SourceId $SourceId -ResourceId $ResourceId -ConfigId $ConfigId  
} catch {
    Write-Host $_.Exception.Response.StatusCode.value__ "Exception occurred when calling Remove-OwnershipCorrelationConfigV1"
    Write-Host $_.ErrorDetails
}

[Back to top]

get-machine-identity-v1

experimental

This API returns a single machine identity using the Machine Identity ID.

API Spec

Parameters

Param Type	Name	Data Type	Required	Description
Path	Id	String	True	Machine Identity ID
XSailPointExperimental	String	True (default to "true")	Use this header to enable this experimental API.

Return type

MachineIdentityResponse

Responses

Code	Description	Data Type
200	A machine identity object	MachineIdentityResponse
400	Client Error - Returned if the request body is invalid.	ErrorResponseDto
401	Unauthorized - Returned if there is no authorization header, or if the JWT token is expired.	ListMachineIdentitiesV1401Response
403	Forbidden - Returned if the user you are running as, doesn't have access to this end-point.	ErrorResponseDto
404	Not Found - returned if the request URL refers to a resource or object that does not exist	ErrorResponseDto
429	Too Many Requests - Returned in response to too many requests in a given period of time - rate limited. The Retry-After header in the response includes how long to wait before trying again.	ListMachineIdentitiesV1429Response
500	Internal Server Error - Returned if there is an unexpected error.	ErrorResponseDto

HTTP request headers

Content-Type: Not defined
Accept: application/json

Example

$Id = "ef38f94347e94562b5bb8424a56397d8" # String | Machine Identity ID
$XSailPointExperimental = "true" # String | Use this header to enable this experimental API. (default to "true")

# Get machine identity details

try {
    Get-MachineIdentityV1 -Id $Id -XSailPointExperimental $XSailPointExperimental 
    
    # Below is a request that includes all optional parameters
    # Get-MachineIdentityV1 -Id $Id -XSailPointExperimental $XSailPointExperimental  
} catch {
    Write-Host $_.Exception.Response.StatusCode.value__ "Exception occurred when calling Get-MachineIdentityV1"
    Write-Host $_.ErrorDetails
}

[Back to top]

get-machine-identity-v2

This API returns a single machine identity using the Machine Identity ID.

API Spec

Parameters

Param Type	Name	Data Type	Required	Description
Path	Id	String	True	Machine Identity ID.

Return type

Machineidentityv2

Responses

Code	Description	Data Type
200	A machine identity object.	Machineidentityv2
400	Client Error - Returned if the request body is invalid.	ErrorResponseDto
401	Unauthorized - Returned if there is no authorization header, or if the JWT token is expired.	ListMachineIdentitiesV1401Response
403	Forbidden - Returned if the user you are running as, doesn't have access to this end-point.	ErrorResponseDto
404	Not Found - returned if the request URL refers to a resource or object that does not exist	ErrorResponseDto
429	Too Many Requests - Returned in response to too many requests in a given period of time - rate limited. The Retry-After header in the response includes how long to wait before trying again.	ListMachineIdentitiesV1429Response
500	Internal Server Error - Returned if there is an unexpected error.	ErrorResponseDto

HTTP request headers

Content-Type: Not defined
Accept: application/json

Example

$Id = "ef38f94347e94562b5bb8424a56397d8" # String | Machine Identity ID.

# Get machine identity details

try {
    Get-MachineIdentityV2 -Id $Id 
    
    # Below is a request that includes all optional parameters
    # Get-MachineIdentityV2 -Id $Id  
} catch {
    Write-Host $_.Exception.Response.StatusCode.value__ "Exception occurred when calling Get-MachineIdentityV2"
    Write-Host $_.ErrorDetails
}

[Back to top]

get-ownership-correlation-config-v1

This end-point retrieves a single ownership correlation config by ID for the specified source resource.

API Spec

Parameters

Param Type	Name	Data Type	Required	Description
Path	SourceId	String	True	The Source ID.
Path	ResourceId	String	True	The source resource ID (for example, account or aws:iam-role).
Path	ConfigId	String	True	The correlation config ID.

Return type

CorrelationConfig

Responses

Code	Description	Data Type
200	The requested correlation config.	CorrelationConfig
400	Client Error - Returned if the request body is invalid.	ErrorResponseDto
401	Unauthorized - Returned if there is no authorization header, or if the JWT token is expired.	ListMachineIdentitiesV1401Response
403	Forbidden - Returned if the user you are running as, doesn't have access to this end-point.	ErrorResponseDto
404	Not Found - returned if the request URL refers to a resource or object that does not exist	ErrorResponseDto
429	Too Many Requests - Returned in response to too many requests in a given period of time - rate limited. The Retry-After header in the response includes how long to wait before trying again.	ListMachineIdentitiesV1429Response
500	Internal Server Error - Returned if there is an unexpected error.	ErrorResponseDto

HTTP request headers

Content-Type: Not defined
Accept: application/json

Example

$SourceId = "2c9180835d191a86015d28455b4a2329" # String | The Source ID.
$ResourceId = "aws:iam-role" # String | The source resource ID (for example, account or aws:iam-role).
$ConfigId = "f5dd23fe-3414-42b7-bb1c-869400ad7a10" # String | The correlation config ID.

# Get ownership correlation config

try {
    Get-OwnershipCorrelationConfigV1 -SourceId $SourceId -ResourceId $ResourceId -ConfigId $ConfigId 
    
    # Below is a request that includes all optional parameters
    # Get-OwnershipCorrelationConfigV1 -SourceId $SourceId -ResourceId $ResourceId -ConfigId $ConfigId  
} catch {
    Write-Host $_.Exception.Response.StatusCode.value__ "Exception occurred when calling Get-OwnershipCorrelationConfigV1"
    Write-Host $_.ErrorDetails
}

[Back to top]

list-machine-identities-v1

experimental

This API returns a list of machine identities.

API Spec

Parameters

Param Type	Name	Data Type	Required	Description
XSailPointExperimental	String	True (default to "true")	Use this header to enable this experimental API.
Query	Filters	String	(optional)	Filter results using the standard syntax described in V3 API Standard Collection Parameters Filtering is supported for the following fields and operators: id: eq, in, sw displayName: eq, in, sw cisIdentityId: eq, in, sw nativeIdentity: eq, in, sw attributes: eq manuallyEdited: eq subtype: eq, in owners.primaryIdentity.id: eq, in, sw owners.primaryIdentity.name: eq, in, isnull, pr owners.secondaryIdentity.id: eq, in, sw owners.secondaryIdentity.name: eq, in, isnull, pr source.name: eq, in, sw source.id: eq, in entitlement.id: eq, in entitlement.name: eq, in, sw
Query	Sorters	String	(optional)	Sort results using the standard syntax described in V3 API Standard Collection Parameters Sorting is supported for the following fields: nativeIdentity, name, owners.primaryIdentity.name, source.name, created, modified
Query	Count	Boolean	(optional) (default to $false)	If true it will populate the X-Total-Count response header with the number of results that would be returned if limit and offset were ignored. Since requesting a total count can have a performance impact, it is recommended not to send count=true if that value will not be used. See V3 API Standard Collection Parameters for more information.
Query	Limit	Int32	(optional) (default to 250)	Max number of results to return. See V3 API Standard Collection Parameters for more information.
Query	Offset	Int32	(optional) (default to 0)	Offset into the full result set. Usually specified with limit to paginate through the results. See V3 API Standard Collection Parameters for more information.

Return type

MachineIdentityResponse[]

Responses

Code	Description	Data Type
200	List of machine identities.	MachineIdentityResponse[]
400	Client Error - Returned if the request body is invalid.	ErrorResponseDto
401	Unauthorized - Returned if there is no authorization header, or if the JWT token is expired.	ListMachineIdentitiesV1401Response
403	Forbidden - Returned if the user you are running as, doesn't have access to this end-point.	ErrorResponseDto
404	Not Found - returned if the request URL refers to a resource or object that does not exist	ErrorResponseDto
429	Too Many Requests - Returned in response to too many requests in a given period of time - rate limited. The Retry-After header in the response includes how long to wait before trying again.	ListMachineIdentitiesV1429Response
500	Internal Server Error - Returned if there is an unexpected error.	ErrorResponseDto

HTTP request headers

Content-Type: Not defined
Accept: application/json

Example

$XSailPointExperimental = "true" # String | Use this header to enable this experimental API. (default to "true")
$Filters = 'identityId eq "2c9180858082150f0180893dbaf44201"' # String | Filter results using the standard syntax described in [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters#filtering-results)  Filtering is supported for the following fields and operators:  **id**: *eq, in, sw*  **displayName**: *eq, in, sw*  **cisIdentityId**: *eq, in, sw*  **nativeIdentity**: *eq, in, sw*  **attributes**: *eq*  **manuallyEdited**: *eq*  **subtype**: *eq, in*  **owners.primaryIdentity.id**: *eq, in, sw*  **owners.primaryIdentity.name**: *eq, in, isnull, pr*  **owners.secondaryIdentity.id**: *eq, in, sw*  **owners.secondaryIdentity.name**: *eq, in, isnull, pr*  **source.name**: *eq, in, sw*  **source.id**: *eq, in*  **entitlement.id**: *eq, in*  **entitlement.name**: *eq, in, sw* (optional)
$Sorters = "nativeIdentity" # String | Sort results using the standard syntax described in [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters#sorting-results)  Sorting is supported for the following fields: **nativeIdentity, name, owners.primaryIdentity.name, source.name, created, modified** (optional)
$Count = $true # Boolean | If *true* it will populate the *X-Total-Count* response header with the number of results that would be returned if *limit* and *offset* were ignored.  Since requesting a total count can have a performance impact, it is recommended not to send **count=true** if that value will not be used.  See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information. (optional) (default to $false)
$Limit = 250 # Int32 | Max number of results to return. See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information. (optional) (default to 250)
$Offset = 0 # Int32 | Offset into the full result set. Usually specified with *limit* to paginate through the results. See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information. (optional) (default to 0)

# List machine identities

try {
    Get-MachineIdentitiesV1 -XSailPointExperimental $XSailPointExperimental 
    
    # Below is a request that includes all optional parameters
    # Get-MachineIdentitiesV1 -XSailPointExperimental $XSailPointExperimental -Filters $Filters -Sorters $Sorters -Count $Count -Limit $Limit -Offset $Offset  
} catch {
    Write-Host $_.Exception.Response.StatusCode.value__ "Exception occurred when calling Get-MachineIdentitiesV1"
    Write-Host $_.ErrorDetails
}

[Back to top]

list-machine-identities-v2

This API returns a list of machine identities.

API Spec

Parameters

Param Type	Name	Data Type	Required	Description
Query	Filters	String	(optional)	Filter results using the standard syntax described in V3 API Standard Collection Parameters Filtering is supported for the following fields and operators: id: eq, in, sw displayName: eq, in, sw nativeIdentity: eq, in, sw attributes: eq manuallyEdited: eq subtype: eq, in owners.primaryIdentity.id: eq, in, sw owners.primaryIdentity.name: eq, in, isnull, pr owners.secondaryIdentity.id: eq, in, sw owners.secondaryIdentity.name: eq, in, isnull, pr owners.secondaryGovernanceGroup.id: eq, in owners.secondaryGovernanceGroup.name: eq, in, isnull, pr source.id: eq, in source.name: eq, in, sw entitlement.id: eq, in entitlement.name: eq, in, sw risk.severity: eq, in businessApplicationRefs.id: eq effectiveSanctionedStatus: eq Business Application filters require Business Applications to be enabled for the tenant. Filter values are case-sensitive. When Business Applications is not enabled, these filters are not allowed and return `400`.
Query	Sorters	String	(optional)	Sort results using the standard syntax described in V3 API Standard Collection Parameters Sorting is supported for the following fields: nativeIdentity, name, owners.primaryIdentity.name, source.name, created, modified
Query	Count	Boolean	(optional) (default to $false)	If true it will populate the X-Total-Count response header with the number of results that would be returned if limit and offset were ignored. Since requesting a total count can have a performance impact, it is recommended not to send count=true if that value will not be used. See V3 API Standard Collection Parameters for more information.
Query	Limit	Int32	(optional) (default to 250)	Max number of results to return. See V3 API Standard Collection Parameters for more information.
Query	Offset	Int32	(optional) (default to 0)	Offset into the full result set. Usually specified with limit to paginate through the results. See V3 API Standard Collection Parameters for more information.

Return type

Machineidentityv2[]

Responses

Code	Description	Data Type
200	List of machine identities.	Machineidentityv2[]
400	Client Error - Returned if the request body is invalid.	ErrorResponseDto
401	Unauthorized - Returned if there is no authorization header, or if the JWT token is expired.	ListMachineIdentitiesV1401Response
403	Forbidden - Returned if the user you are running as, doesn't have access to this end-point.	ErrorResponseDto
404	Not Found - returned if the request URL refers to a resource or object that does not exist	ErrorResponseDto
429	Too Many Requests - Returned in response to too many requests in a given period of time - rate limited. The Retry-After header in the response includes how long to wait before trying again.	ListMachineIdentitiesV1429Response
500	Internal Server Error - Returned if there is an unexpected error.	ErrorResponseDto

HTTP request headers

Content-Type: Not defined
Accept: application/json

Example

$Filters = 'identityId eq "2c9180858082150f0180893dbaf44201"' # String | Filter results using the standard syntax described in [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters#filtering-results)  Filtering is supported for the following fields and operators:  **id**: *eq, in, sw*  **displayName**: *eq, in, sw*  **nativeIdentity**: *eq, in, sw*  **attributes**: *eq*  **manuallyEdited**: *eq*  **subtype**: *eq, in*  **owners.primaryIdentity.id**: *eq, in, sw*  **owners.primaryIdentity.name**: *eq, in, isnull, pr*  **owners.secondaryIdentity.id**: *eq, in, sw*  **owners.secondaryIdentity.name**: *eq, in, isnull, pr*  **owners.secondaryGovernanceGroup.id**: *eq, in*  **owners.secondaryGovernanceGroup.name**: *eq, in, isnull, pr*  **source.id**: *eq, in*  **source.name**: *eq, in, sw*  **entitlement.id**: *eq, in*  **entitlement.name**: *eq, in, sw*  **risk.severity**: *eq, in*  **businessApplicationRefs.id**: *eq*  **effectiveSanctionedStatus**: *eq*  Business Application filters require Business Applications to be enabled for the tenant. Filter values are case-sensitive. When Business Applications is not enabled, these filters are not allowed and return `400`. (optional)
$Sorters = "nativeIdentity" # String | Sort results using the standard syntax described in [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters#sorting-results)  Sorting is supported for the following fields: **nativeIdentity, name, owners.primaryIdentity.name, source.name, created, modified** (optional)
$Count = $true # Boolean | If *true* it will populate the *X-Total-Count* response header with the number of results that would be returned if *limit* and *offset* were ignored.  Since requesting a total count can have a performance impact, it is recommended not to send **count=true** if that value will not be used.  See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information. (optional) (default to $false)
$Limit = 250 # Int32 | Max number of results to return. See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information. (optional) (default to 250)
$Offset = 0 # Int32 | Offset into the full result set. Usually specified with *limit* to paginate through the results. See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information. (optional) (default to 0)

# List machine identities

try {
    Get-MachineIdentitiesV2 
    
    # Below is a request that includes all optional parameters
    # Get-MachineIdentitiesV2 -Filters $Filters -Sorters $Sorters -Count $Count -Limit $Limit -Offset $Offset  
} catch {
    Write-Host $_.Exception.Response.StatusCode.value__ "Exception occurred when calling Get-MachineIdentitiesV2"
    Write-Host $_.ErrorDetails
}

[Back to top]

list-machine-identity-user-entitlements-v1

experimental

This API returns a list of user entitlements associated with machine identities.

API Spec

Parameters

Param Type	Name	Data Type	Required	Description
XSailPointExperimental	String	True (default to "true")	Use this header to enable this experimental API.
Query	Filters	String	(optional)	Filter results using the standard syntax described in V3 API Standard Collection Parameters Filtering is supported for the following fields and operators: machineIdentityId: eq, in machineIdentityName: eq, in, sw entitlement.id: eq, in entitlement.name: eq, in, sw source.id: eq, in source.name: eq, in, sw
Query	Sorters	String	(optional)	Sort results using the standard syntax described in V3 API Standard Collection Parameters Sorting is supported for the following fields: machineIdentityName, entitlement.name, source.name
Query	Count	Boolean	(optional) (default to $false)	If true it will populate the X-Total-Count response header with the number of results that would be returned if limit and offset were ignored. Since requesting a total count can have a performance impact, it is recommended not to send count=true if that value will not be used. See V3 API Standard Collection Parameters for more information.
Query	Limit	Int32	(optional) (default to 250)	Max number of results to return. See V3 API Standard Collection Parameters for more information.
Query	Offset	Int32	(optional) (default to 0)	Offset into the full result set. Usually specified with limit to paginate through the results. See V3 API Standard Collection Parameters for more information.

Return type

MachineIdentityUserEntitlementResponse[]

Responses

Code	Description	Data Type
200	List of machine identity user entitlements.	MachineIdentityUserEntitlementResponse[]
400	Client Error - Returned if the request body is invalid.	ErrorResponseDto
401	Unauthorized - Returned if there is no authorization header, or if the JWT token is expired.	ListMachineIdentitiesV1401Response
403	Forbidden - Returned if the user you are running as, doesn't have access to this end-point.	ErrorResponseDto
404	Not Found - returned if the request URL refers to a resource or object that does not exist	ErrorResponseDto
429	Too Many Requests - Returned in response to too many requests in a given period of time - rate limited. The Retry-After header in the response includes how long to wait before trying again.	ListMachineIdentitiesV1429Response
500	Internal Server Error - Returned if there is an unexpected error.	ErrorResponseDto

HTTP request headers

Content-Type: Not defined
Accept: application/json

Example

$XSailPointExperimental = "true" # String | Use this header to enable this experimental API. (default to "true")
$Filters = 'machineIdentityId eq "2c9180858082150f0180893dbaf44201"' # String | Filter results using the standard syntax described in [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters#filtering-results)  Filtering is supported for the following fields and operators:  **machineIdentityId**: *eq, in*  **machineIdentityName**: *eq, in, sw*  **entitlement.id**: *eq, in*  **entitlement.name**: *eq, in, sw*  **source.id**: *eq, in*  **source.name**: *eq, in, sw* (optional)
$Sorters = "machineIdentityName" # String | Sort results using the standard syntax described in [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters#sorting-results)  Sorting is supported for the following fields: **machineIdentityName, entitlement.name, source.name** (optional)
$Count = $true # Boolean | If *true* it will populate the *X-Total-Count* response header with the number of results that would be returned if *limit* and *offset* were ignored.  Since requesting a total count can have a performance impact, it is recommended not to send **count=true** if that value will not be used.  See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information. (optional) (default to $false)
$Limit = 250 # Int32 | Max number of results to return. See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information. (optional) (default to 250)
$Offset = 0 # Int32 | Offset into the full result set. Usually specified with *limit* to paginate through the results. See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information. (optional) (default to 0)

# List machine identity's user entitlements

try {
    Get-MachineIdentityUserEntitlementsV1 -XSailPointExperimental $XSailPointExperimental 
    
    # Below is a request that includes all optional parameters
    # Get-MachineIdentityUserEntitlementsV1 -XSailPointExperimental $XSailPointExperimental -Filters $Filters -Sorters $Sorters -Count $Count -Limit $Limit -Offset $Offset  
} catch {
    Write-Host $_.Exception.Response.StatusCode.value__ "Exception occurred when calling Get-MachineIdentityUserEntitlementsV1"
    Write-Host $_.ErrorDetails
}

[Back to top]

list-ownership-correlation-configs-v1

Returns the OWNER_PRIMARY and OWNER_SECONDARY correlation configs for the specified source resource, creating default rows if they are missing. Use the optional type query parameter to return a single matching config.

API Spec

Parameters

Param Type	Name	Data Type	Required	Description
Path	SourceId	String	True	The Source ID.
Path	ResourceId	String	True	The source resource ID (for example, account or aws:iam-role).
Query	Type	String	(optional)	When set, filters to the given config type.
Query	Count	Boolean	(optional) (default to $false)	If true it will populate the X-Total-Count response header with the number of results that would be returned if limit and offset were ignored. Since requesting a total count can have a performance impact, it is recommended not to send count=true if that value will not be used. See V3 API Standard Collection Parameters for more information.
Query	Limit	Int32	(optional) (default to 250)	Max number of results to return. See V3 API Standard Collection Parameters for more information.
Query	Offset	Int32	(optional) (default to 0)	Offset into the full result set. Usually specified with limit to paginate through the results. See V3 API Standard Collection Parameters for more information.

Return type

CorrelationConfig[]

Responses

Code	Description	Data Type
200	List of correlation configs.	CorrelationConfig[]
400	Client Error - Returned if the request body is invalid.	ErrorResponseDto
401	Unauthorized - Returned if there is no authorization header, or if the JWT token is expired.	ListMachineIdentitiesV1401Response
403	Forbidden - Returned if the user you are running as, doesn't have access to this end-point.	ErrorResponseDto
429	Too Many Requests - Returned in response to too many requests in a given period of time - rate limited. The Retry-After header in the response includes how long to wait before trying again.	ListMachineIdentitiesV1429Response
500	Internal Server Error - Returned if there is an unexpected error.	ErrorResponseDto

HTTP request headers

Content-Type: Not defined
Accept: application/json

Example

$SourceId = "2c9180835d191a86015d28455b4a2329" # String | The Source ID.
$ResourceId = "aws:iam-role" # String | The source resource ID (for example, account or aws:iam-role).
$Type = "OWNER_PRIMARY" # String | When set, filters to the given config type. (optional)
$Count = $true # Boolean | If *true* it will populate the *X-Total-Count* response header with the number of results that would be returned if *limit* and *offset* were ignored.  Since requesting a total count can have a performance impact, it is recommended not to send **count=true** if that value will not be used.  See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information. (optional) (default to $false)
$Limit = 250 # Int32 | Max number of results to return. See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information. (optional) (default to 250)
$Offset = 0 # Int32 | Offset into the full result set. Usually specified with *limit* to paginate through the results. See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information. (optional) (default to 0)

# List ownership correlation configs

try {
    Get-OwnershipCorrelationConfigsV1 -SourceId $SourceId -ResourceId $ResourceId 
    
    # Below is a request that includes all optional parameters
    # Get-OwnershipCorrelationConfigsV1 -SourceId $SourceId -ResourceId $ResourceId -Type $Type -Count $Count -Limit $Limit -Offset $Offset  
} catch {
    Write-Host $_.Exception.Response.StatusCode.value__ "Exception occurred when calling Get-OwnershipCorrelationConfigsV1"
    Write-Host $_.ErrorDetails
}

[Back to top]

patch-ownership-correlation-config-v1

Selectively updates an ownership correlation config using an RFC 6902 JSONPatch payload. Only replace on /attributes (full object) and replace on /rules (full array; merge by stable rule id, remove rules omitted from the array) are allowed.

API Spec

Parameters

Param Type	Name	Data Type	Required	Description
Path	SourceId	String	True	The Source ID.
Path	ResourceId	String	True	The source resource ID (for example, account or aws:iam-role).
Path	ConfigId	String	True	The correlation config ID.
Body	JsonPatchOperation	[]JsonPatchOperation	True	The JSONPatch payload used to update the correlation config.

Return type

CorrelationConfig

Responses

Code	Description	Data Type
200	The updated correlation config.	CorrelationConfig
400	Client Error - Returned if the request body is invalid.	ErrorResponseDto
401	Unauthorized - Returned if there is no authorization header, or if the JWT token is expired.	ListMachineIdentitiesV1401Response
403	Forbidden - Returned if the user you are running as, doesn't have access to this end-point.	ErrorResponseDto
404	Not Found - returned if the request URL refers to a resource or object that does not exist	ErrorResponseDto
429	Too Many Requests - Returned in response to too many requests in a given period of time - rate limited. The Retry-After header in the response includes how long to wait before trying again.	ListMachineIdentitiesV1429Response
500	Internal Server Error - Returned if there is an unexpected error.	ErrorResponseDto

HTTP request headers

Content-Type: application/json-patch+json
Accept: application/json

Example

$SourceId = "2c9180835d191a86015d28455b4a2329" # String | The Source ID.
$ResourceId = "aws:iam-role" # String | The source resource ID (for example, account or aws:iam-role).
$ConfigId = "f5dd23fe-3414-42b7-bb1c-869400ad7a10" # String | The correlation config ID.
 $JsonPatchOperation = @"{
  "op" : "replace",
  "path" : "/description",
  "value" : "New description"
}"@ # JsonPatchOperation[] | The JSONPatch payload used to update the correlation config.
 

# Patch ownership correlation config

try {
    $Result = ConvertFrom-JsonToJsonPatchOperation -Json $JsonPatchOperation
    Update-OwnershipCorrelationConfigV1 -SourceId $SourceId -ResourceId $ResourceId -ConfigId $ConfigId -JsonPatchOperation $Result 
    
    # Below is a request that includes all optional parameters
    # Update-OwnershipCorrelationConfigV1 -SourceId $SourceId -ResourceId $ResourceId -ConfigId $ConfigId -JsonPatchOperation $Result  
} catch {
    Write-Host $_.Exception.Response.StatusCode.value__ "Exception occurred when calling Update-OwnershipCorrelationConfigV1"
    Write-Host $_.ErrorDetails
}

[Back to top]

start-machine-identity-aggregation-v1

experimental

Starts a machine identity (AI Agents) aggregation on the specified source.

API Spec

Parameters

Param Type	Name	Data Type	Required	Description
Path	SourceId	String	True	Source ID.
XSailPointExperimental	String	True (default to "true")	Use this header to enable this experimental API.
Body	MachineIdentityAggregationRequest	MachineIdentityAggregationRequest	True

Return type

MachineIdentityAggregationResponse

Responses

Code	Description	Data Type
200	Machine Identity Aggregation was started successfully.	MachineIdentityAggregationResponse
400	Client Error - Returned if the request body is invalid.	ErrorResponseDto
401	Unauthorized - Returned if there is no authorization header, or if the JWT token is expired.	ListMachineIdentitiesV1401Response
403	Forbidden - Returned if the user you are running as, doesn't have access to this end-point.	ErrorResponseDto
404	Not Found - returned if the request URL refers to a resource or object that does not exist	ErrorResponseDto
429	Too Many Requests - Returned in response to too many requests in a given period of time - rate limited. The Retry-After header in the response includes how long to wait before trying again.	ListMachineIdentitiesV1429Response
500	Internal Server Error - Returned if there is an unexpected error.	ErrorResponseDto

HTTP request headers

Content-Type: application/json
Accept: application/json

Example

$SourceId = "ef38f94347e94562b5bb8424a56397d8" # String | Source ID.
$XSailPointExperimental = "true" # String | Use this header to enable this experimental API. (default to "true")
$MachineIdentityAggregationRequest = @"{
  "datasetIds" : [ "source:datasetId12345", "source:datasetId12345" ],
  "disableOptimization" : false
}"@

# Start machine identity aggregation

try {
    $Result = ConvertFrom-JsonToMachineIdentityAggregationRequest -Json $MachineIdentityAggregationRequest
    Start-MachineIdentityAggregationV1 -SourceId $SourceId -XSailPointExperimental $XSailPointExperimental -MachineIdentityAggregationRequest $Result 
    
    # Below is a request that includes all optional parameters
    # Start-MachineIdentityAggregationV1 -SourceId $SourceId -XSailPointExperimental $XSailPointExperimental -MachineIdentityAggregationRequest $Result  
} catch {
    Write-Host $_.Exception.Response.StatusCode.value__ "Exception occurred when calling Start-MachineIdentityAggregationV1"
    Write-Host $_.ErrorDetails
}

[Back to top]

update-machine-identity-v1

experimental

Use this API to update machine identity details.

API Spec

Parameters

Param Type	Name	Data Type	Required	Description
Path	Id	String	True	Machine Identity ID.
XSailPointExperimental	String	True (default to "true")	Use this header to enable this experimental API.
Body	RequestBody	[]SystemCollectionsHashtable	True	A JSON of updated values JSON Patch standard.

Return type

MachineIdentityResponse

Responses

Code	Description	Data Type
200	Updated Machine Identity object.	MachineIdentityResponse
400	Client Error - Returned if the request body is invalid.	ErrorResponseDto
401	Unauthorized - Returned if there is no authorization header, or if the JWT token is expired.	ListMachineIdentitiesV1401Response
403	Forbidden - Returned if the user you are running as, doesn't have access to this end-point.	ErrorResponseDto
404	Not Found - returned if the request URL refers to a resource or object that does not exist	ErrorResponseDto
429	Too Many Requests - Returned in response to too many requests in a given period of time - rate limited. The Retry-After header in the response includes how long to wait before trying again.	ListMachineIdentitiesV1429Response
500	Internal Server Error - Returned if there is an unexpected error.	ErrorResponseDto

HTTP request headers

Content-Type: application/json-patch+json
Accept: application/json

Example

$Id = "ef38f94347e94562b5bb8424a56397d8" # String | Machine Identity ID.
$XSailPointExperimental = "true" # String | Use this header to enable this experimental API. (default to "true")
$RequestBody =  # SystemCollectionsHashtable[] | A JSON of updated values [JSON Patch](https://tools.ietf.org/html/rfc6902) standard.
 $RequestBody = @"[{"op":"add","path":"/attributes/securityRisk","value":"medium"}]"@ # SystemCollectionsHashtable[] | A JSON of updated values [JSON Patch](https://tools.ietf.org/html/rfc6902) standard.
 

# Update machine identity details

try {
    $Result = ConvertFrom-JsonToRequestBody -Json $RequestBody
    Update-MachineIdentityV1 -Id $Id -XSailPointExperimental $XSailPointExperimental -RequestBody $Result 
    
    # Below is a request that includes all optional parameters
    # Update-MachineIdentityV1 -Id $Id -XSailPointExperimental $XSailPointExperimental -RequestBody $Result  
} catch {
    Write-Host $_.Exception.Response.StatusCode.value__ "Exception occurred when calling Update-MachineIdentityV1"
    Write-Host $_.ErrorDetails
}

[Back to top]

update-machine-identity-v2

Use this API to selectively update machine identity details using a JSONPatch payload.

Patchable fields include name, description, nativeIdentity, subtype, environment, attributes, owners, userEntitlements, manuallyEdited, and businessApplicationRefs (when Business Applications is enabled for the tenant).

When Business Applications is enabled for the tenant, /businessApplicationRefs may be replaced with at most one MANUAL Business Application reference, or cleared with an empty array. Patching /businessApplicationRefs when Business Applications is not enabled returns 400. Existing AUTOMATIC correlations cannot be overridden (400 / ILLEGAL_UPDATE_ATTEMPT). Unknown BA id returns 404.

API Spec

Parameters

Param Type	Name	Data Type	Required	Description
Path	Id	String	True	Machine Identity ID.
Body	JsonPatchOperation	[]JsonPatchOperation	True	A JSON of updated values JSON Patch standard.

Return type

Machineidentityv2

Responses

Code	Description	Data Type
200	Updated machine identity object.	Machineidentityv2
400	Client Error - Returned if the request body is invalid.	ErrorResponseDto
401	Unauthorized - Returned if there is no authorization header, or if the JWT token is expired.	ListMachineIdentitiesV1401Response
403	Forbidden - Returned if the user you are running as, doesn't have access to this end-point.	ErrorResponseDto
404	Not Found - returned if the request URL refers to a resource or object that does not exist	ErrorResponseDto
429	Too Many Requests - Returned in response to too many requests in a given period of time - rate limited. The Retry-After header in the response includes how long to wait before trying again.	ListMachineIdentitiesV1429Response
500	Internal Server Error - Returned if there is an unexpected error.	ErrorResponseDto

HTTP request headers

Content-Type: application/json-patch+json
Accept: application/json

Example

$Id = "ef38f94347e94562b5bb8424a56397d8" # String | Machine Identity ID.
 $JsonPatchOperation = @"{
  "op" : "replace",
  "path" : "/description",
  "value" : "New description"
}"@ # JsonPatchOperation[] | A JSON of updated values [JSON Patch](https://tools.ietf.org/html/rfc6902) standard.
 

# Partial update of machine identity

try {
    $Result = ConvertFrom-JsonToJsonPatchOperation -Json $JsonPatchOperation
    Update-MachineIdentityV2 -Id $Id -JsonPatchOperation $Result 
    
    # Below is a request that includes all optional parameters
    # Update-MachineIdentityV2 -Id $Id -JsonPatchOperation $Result  
} catch {
    Write-Host $_.Exception.Response.StatusCode.value__ "Exception occurred when calling Update-MachineIdentityV2"
    Write-Host $_.ErrorDetails
}

[Back to top]

create-machine-identity-v1​

Parameters​

Return type​

Responses​

HTTP request headers​

Example​

create-machine-identity-v2​

Parameters​

Return type​

Responses​

HTTP request headers​

Example​

delete-machine-identity-v1​

Parameters​

Return type​

Responses​

HTTP request headers​

Example​

delete-machine-identity-v2​

Parameters​

Return type​

Responses​

HTTP request headers​

Example​

delete-ownership-correlation-config-v1​

Parameters​

Return type​

Responses​

HTTP request headers​

Example​

get-machine-identity-v1​

Parameters​

Return type​

Responses​

HTTP request headers​

Example​

get-machine-identity-v2​

Parameters​

Return type​

Responses​

HTTP request headers​

Example​

get-ownership-correlation-config-v1​

Parameters​

Return type​

Responses​

HTTP request headers​

Example​

list-machine-identities-v1​

Parameters​

Return type​

Responses​

HTTP request headers​

Example​

list-machine-identities-v2​

Parameters​

Return type​

Responses​

HTTP request headers​

Example​

list-machine-identity-user-entitlements-v1​

Parameters​

Return type​

Responses​

HTTP request headers​

Example​

list-ownership-correlation-configs-v1​

Parameters​

Return type​

Responses​

HTTP request headers​

Example​

patch-ownership-correlation-config-v1​

Parameters​

Return type​

Responses​

HTTP request headers​

Example​

start-machine-identity-aggregation-v1​

Parameters​

create-machine-identity-v1

Parameters

Return type

Responses

HTTP request headers

Example

create-machine-identity-v2

Parameters

Return type

Responses

HTTP request headers

Example

delete-machine-identity-v1

Parameters

Return type

Responses

HTTP request headers

Example

delete-machine-identity-v2

Parameters

Return type

Responses

HTTP request headers

Example

delete-ownership-correlation-config-v1

Parameters

Return type

Responses

HTTP request headers

Example

get-machine-identity-v1

Parameters

Return type

Responses

HTTP request headers

Example

get-machine-identity-v2

Parameters

Return type

Responses

HTTP request headers

Example

get-ownership-correlation-config-v1

Parameters

Return type

Responses

HTTP request headers

Example

list-machine-identities-v1

Parameters

Return type

Responses

HTTP request headers

Example

list-machine-identities-v2

Parameters

Return type

Responses

HTTP request headers

Example

list-machine-identity-user-entitlements-v1

Parameters

Return type

Responses

HTTP request headers

Example

list-ownership-correlation-configs-v1

Parameters

Return type

Responses

HTTP request headers

Example

patch-ownership-correlation-config-v1

Parameters

Return type

Responses

HTTP request headers

Example

start-machine-identity-aggregation-v1

Parameters