MachineAccountSubtypesAPI

Use this API to get, update, and delete machine account subtype for sources.

All URIs are relative to https://sailpoint.api.identitynow.com

Method	HTTP request	Description
create-source-subtype-override-v2	Post `/source-subtypes/v2/{id}/overrides`	Override source connector subtype
create-source-subtype-provisioning-policy-v2	Post `/source-subtypes/v2/{id}/provisioning-policy`	Create subtype provisioning policy
create-source-subtype-v1	Post `/source-subtypes/v1`	Create subtype
create-source-subtype-v2	Post `/source-subtypes/v2`	Create subtype
delete-machine-account-subtype-v1	Delete `/source-subtypes/v1/{subtypeId}`	Delete subtype by ID
delete-machine-account-subtype-v2	Delete `/source-subtypes/v2/{id}`	Delete subtype by ID
delete-source-subtype-provisioning-policy-v2	Delete `/source-subtypes/v2/{id}/provisioning-policy`	Delete subtype provisioning policy
get-machine-account-subtype-approval-config-v1	Get `/source-subtypes/v1/{subtypeId}/machine-config`	Machine Subtype Approval Config
get-source-subtype-by-id-v1	Get `/source-subtypes/v1/{subtypeId}`	Get subtype by ID
get-source-subtype-by-id-v2	Get `/source-subtypes/v2/{id}`	Get subtype by ID
get-source-subtype-provisioning-policy-v2	Get `/source-subtypes/v2/{id}/provisioning-policy`	Get subtype provisioning policy
list-source-subtype-targets-v2	Get `/source-subtypes/v2/targets`	List subtype targets
list-source-subtypes-v1	Get `/source-subtypes/v1`	Retrieve all subtypes
list-source-subtypes-v2	Get `/source-subtypes/v2`	List subtypes
load-bulk-source-subtypes-v1	Post `/source-subtypes/v1/bulk-retrieve`	Bulk Retrieve of Source Subtypes
patch-machine-account-subtype-v1	Patch `/source-subtypes/v1/{subtypeId}`	Patch subtype by ID
patch-machine-account-subtype-v2	Patch `/source-subtypes/v2/{id}`	Patch subtype by ID
patch-source-subtype-provisioning-policy-v2	Patch `/source-subtypes/v2/{id}/provisioning-policy`	Patch subtype provisioning policy
update-machine-account-subtype-approval-config-v1	Patch `/source-subtypes/v1/{subtypeId}/machine-config`	Machine Subtype Approval Config

create-source-subtype-override-v2

experimental

This API is currently in an experimental state. The API is subject to change based on feedback and further testing. You must include the X-SailPoint-Experimental header and set it to true to use this endpoint.

setting x-sailpoint-experimental header

on the configuration object you can set the x-sailpoint-experimental header to `true' to enable all experimantl endpoints within the SDK. Example:

  configuration = Configuration()
  configuration.Experimental = true

Override source connector subtype Create a source subtype that overrides a connector subtype on one source. The new source subtype copies the connector subtype's machine account configuration and provisioning policy at the time of the request. Later changes to the connector subtype are not applied to the override.

The subtype identified by id must be a CONNECTOR subtype (otherwise 400) that is in the source's effective subtypes. An unknown subtype or source returns 404. The request is rejected if the tenant's subtype configuration cannot be changed this way.

The caller needs the idn:source-subtypes:create right, held by org admins, source admins and source sub-admins. A caller without it receives 404, not 403. A malformed ID returns 400.

This API returns 404 when Machine Identity Security or tiered subtype configuration is not enabled for the tenant.

API Spec

Path Parameters

Name	Type	Description	Notes
ctx	context.Context	context for authentication, logging, cancellation, deadlines, tracing, etc.
id	string	The ID of the connector subtype to override.

Other Parameters

Other parameters are passed through a pointer to a apiCreateSourceSubtypeOverrideV2Request struct via the builder pattern

Name	Type	Description	Notes

Return type

SourceSubtypeV2

HTTP request headers

Content-Type: application/json
Accept: application/json

Example

package main

import (
	"context"
	"fmt"
	"os"
  "encoding/json"
    machine_account_subtypes "github.com/sailpoint-oss/golang-sdk/v3/machine_account_subtypes"
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    id := `43bdd144-4b17-4fce-a744-17c7fd3e717b` // string | The ID of the connector subtype to override. # string | The ID of the connector subtype to override.
    xSailPointExperimental := `true` // string | Use this header to enable this experimental API. (default to "true") # string | Use this header to enable this experimental API. (default to "true")
    sourcesubtypeoverriderequestJson := []byte(`{
          "sourceId" : "6d0458373bec4b4b80460992b76016da"
        }`) // SourceSubtypeOverrideRequest | 

    var sourceSubtypeOverrideRequest machine_account_subtypes.SourceSubtypeOverrideRequest
    if err := json.Unmarshal(sourcesubtypeoverriderequestJson, &sourceSubtypeOverrideRequest); err != nil {
      fmt.Println("Error:", err)
      return
    }
    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    resp, r, err := apiClient.MachineAccountSubtypesAPI.CreateSourceSubtypeOverrideV2(context.Background(), id).XSailPointExperimental(xSailPointExperimental).SourceSubtypeOverrideRequest(sourceSubtypeOverrideRequest).Execute()
	  //resp, r, err := apiClient.MachineAccountSubtypesAPI.CreateSourceSubtypeOverrideV2(context.Background(), id).XSailPointExperimental(xSailPointExperimental).SourceSubtypeOverrideRequest(sourceSubtypeOverrideRequest).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `MachineAccountSubtypesAPI.CreateSourceSubtypeOverrideV2``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    // response from `CreateSourceSubtypeOverrideV2`: SourceSubtypeV2
    fmt.Fprintf(os.Stdout, "Response from `MachineAccountSubtypesAPI.CreateSourceSubtypeOverrideV2`: %v\n", resp)
}

[Back to top]

create-source-subtype-provisioning-policy-v2

experimental

setting x-sailpoint-experimental header

on the configuration object you can set the x-sailpoint-experimental header to `true' to enable all experimantl endpoints within the SDK. Example:

  configuration = Configuration()
  configuration.Experimental = true

Create subtype provisioning policy Create the machine account creation provisioning policy of a subtype of any tier. A subtype has at most one provisioning policy; the request is rejected if one already exists.

id and subtypeId must not be supplied (otherwise 400). usageType must be CREATE_MACHINE_ACCOUNT or omitted. name defaults to the subtype's display name.

Who can call this API depends on the tier of the subtype:

SOURCE: requires the idn:source-subtypes:update right, held by org admins, source admins and source sub-admins.
CONNECTOR: requires the idn:connector-subtypes:update right, held by org admins.

A caller without the right for the subtype's tier receives 404, not 403. A malformed ID returns 400.

This API returns 404 when Machine Identity Security or tiered subtype configuration is not enabled for the tenant.

API Spec

Path Parameters

Name	Type	Description	Notes
ctx	context.Context	context for authentication, logging, cancellation, deadlines, tracing, etc.
id	string	The ID of the subtype.

Other Parameters

Other parameters are passed through a pointer to a apiCreateSourceSubtypeProvisioningPolicyV2Request struct via the builder pattern

Name	Type	Description	Notes

xSailPointExperimental | string | Use this header to enable this experimental API. | [default to "true"] subtypeProvisioningPolicy | SubtypeProvisioningPolicy | | useDefaultFields | bool | When `true` and the request body has no `fields`, a `CONNECTOR` subtype's policy is created with the connector's default account creation fields. Ignored for `SOURCE` subtypes. | [default to true]

Return type

SubtypeProvisioningPolicy

HTTP request headers

Content-Type: application/json
Accept: application/json

Example

package main

import (
	"context"
	"fmt"
	"os"
  "encoding/json"
    machine_account_subtypes "github.com/sailpoint-oss/golang-sdk/v3/machine_account_subtypes"
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    id := `43bdd144-4b17-4fce-a744-17c7fd3e717b` // string | The ID of the subtype. # string | The ID of the subtype.
    xSailPointExperimental := `true` // string | Use this header to enable this experimental API. (default to "true") # string | Use this header to enable this experimental API. (default to "true")
    subtypeprovisioningpolicyJson := []byte(`{
          "name" : "Service Account",
          "description" : "Fields collected when creating a service account.",
          "id" : "d7ae9ea3-507f-4d00-9d4f-b4464b344b88",
          "subtypeId" : "43bdd144-4b17-4fce-a744-17c7fd3e717b",
          "fields" : [ {
            "isRequired" : false,
            "transform" : {
              "type" : "rule",
              "attributes" : {
                "name" : "Create Unique LDAP Attribute"
              }
            },
            "isMultiValued" : false,
            "name" : "userName",
            "attributes" : {
              "template" : "{firstname}.{lastname}{uniqueCounter}",
              "cloudMaxUniqueChecks" : "50",
              "cloudMaxSize" : "20",
              "cloudRequired" : "true"
            },
            "type" : "string"
          }, {
            "isRequired" : false,
            "transform" : {
              "type" : "rule",
              "attributes" : {
                "name" : "Create Unique LDAP Attribute"
              }
            },
            "isMultiValued" : false,
            "name" : "userName",
            "attributes" : {
              "template" : "{firstname}.{lastname}{uniqueCounter}",
              "cloudMaxUniqueChecks" : "50",
              "cloudMaxSize" : "20",
              "cloudRequired" : "true"
            },
            "type" : "string"
          } ],
          "usageType" : "CREATE_MACHINE_ACCOUNT"
        }`) // SubtypeProvisioningPolicy | 
    useDefaultFields := true // bool | When `true` and the request body has no `fields`, a `CONNECTOR` subtype's policy is created with the connector's default account creation fields. Ignored for `SOURCE` subtypes. (optional) (default to true) # bool | When `true` and the request body has no `fields`, a `CONNECTOR` subtype's policy is created with the connector's default account creation fields. Ignored for `SOURCE` subtypes. (optional) (default to true)

    var subtypeProvisioningPolicy machine_account_subtypes.SubtypeProvisioningPolicy
    if err := json.Unmarshal(subtypeprovisioningpolicyJson, &subtypeProvisioningPolicy); err != nil {
      fmt.Println("Error:", err)
      return
    }
    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    resp, r, err := apiClient.MachineAccountSubtypesAPI.CreateSourceSubtypeProvisioningPolicyV2(context.Background(), id).XSailPointExperimental(xSailPointExperimental).SubtypeProvisioningPolicy(subtypeProvisioningPolicy).Execute()
	  //resp, r, err := apiClient.MachineAccountSubtypesAPI.CreateSourceSubtypeProvisioningPolicyV2(context.Background(), id).XSailPointExperimental(xSailPointExperimental).SubtypeProvisioningPolicy(subtypeProvisioningPolicy).UseDefaultFields(useDefaultFields).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `MachineAccountSubtypesAPI.CreateSourceSubtypeProvisioningPolicyV2``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    // response from `CreateSourceSubtypeProvisioningPolicyV2`: SubtypeProvisioningPolicy
    fmt.Fprintf(os.Stdout, "Response from `MachineAccountSubtypesAPI.CreateSourceSubtypeProvisioningPolicyV2`: %v\n", resp)
}

[Back to top]

create-source-subtype-v1

experimental

setting x-sailpoint-experimental header

on the configuration object you can set the x-sailpoint-experimental header to `true' to enable all experimantl endpoints within the SDK. Example:

  configuration = Configuration()
  configuration.Experimental = true

Create subtype Create a new machine account subtype.

API Spec

Path Parameters

Other Parameters

Other parameters are passed through a pointer to a apiCreateSourceSubtypeV1Request struct via the builder pattern

Name	Type	Description	Notes
xSailPointExperimental	string	Use this header to enable this experimental API.	[default to "true"]
createSourceSubtypeV1Request	CreateSourceSubtypeV1Request

Return type

SourceSubtypeWithSource

HTTP request headers

Content-Type: application/json
Accept: application/json

Example

package main

import (
	"context"
	"fmt"
	"os"
  "encoding/json"
    machine_account_subtypes "github.com/sailpoint-oss/golang-sdk/v3/machine_account_subtypes"
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    xSailPointExperimental := `true` // string | Use this header to enable this experimental API. (default to "true") # string | Use this header to enable this experimental API. (default to "true")
    createsourcesubtypev1requestJson := []byte(`{"sourceId":"6d0458373bec4b4b80460992b76016da","technicalName":"foo","displayName":"Mr Foo","description":"fighters","type":"MACHINE"}`) // CreateSourceSubtypeV1Request | 

    var createSourceSubtypeV1Request machine_account_subtypes.CreateSourceSubtypeV1Request
    if err := json.Unmarshal(createsourcesubtypev1requestJson, &createSourceSubtypeV1Request); err != nil {
      fmt.Println("Error:", err)
      return
    }
    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    resp, r, err := apiClient.MachineAccountSubtypesAPI.CreateSourceSubtypeV1(context.Background()).XSailPointExperimental(xSailPointExperimental).CreateSourceSubtypeV1Request(createSourceSubtypeV1Request).Execute()
	  //resp, r, err := apiClient.MachineAccountSubtypesAPI.CreateSourceSubtypeV1(context.Background()).XSailPointExperimental(xSailPointExperimental).CreateSourceSubtypeV1Request(createSourceSubtypeV1Request).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `MachineAccountSubtypesAPI.CreateSourceSubtypeV1``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    // response from `CreateSourceSubtypeV1`: SourceSubtypeWithSource
    fmt.Fprintf(os.Stdout, "Response from `MachineAccountSubtypesAPI.CreateSourceSubtypeV1`: %v\n", resp)
}

[Back to top]

create-source-subtype-v2

experimental

setting x-sailpoint-experimental header

on the configuration object you can set the x-sailpoint-experimental header to `true' to enable all experimantl endpoints within the SDK. Example:

  configuration = Configuration()
  configuration.Experimental = true

Create subtype Create a machine account subtype at the source tier or the connector tier.

A SOURCE subtype applies to the one source identified by targetId. A CONNECTOR subtype applies to every source of the connector type identified by targetId, which must be a registered connector type. targetType defaults to SOURCE. CONNECTOR_VARIANT is not supported and returns 400. technicalName, displayName and description are required, and the technical name and display name must be unique within the tier's scope.

Who can call this API depends on the requested tier:

SOURCE (or omitted): requires the idn:source-subtypes:create right, held by org admins, source admins and source sub-admins.
CONNECTOR: requires the idn:connector-subtypes:create right, held by org admins.

A caller without the right for the requested tier receives 404, not 403.

This API returns 404 when Machine Identity Security or tiered subtype configuration is not enabled for the tenant.

API Spec

Path Parameters

Other Parameters

Other parameters are passed through a pointer to a apiCreateSourceSubtypeV2Request struct via the builder pattern

Name	Type	Description	Notes
xSailPointExperimental	string	Use this header to enable this experimental API.	[default to "true"]
createSourceSubtypeV2Request	CreateSourceSubtypeV2Request

Return type

SourceSubtypeV2

HTTP request headers

Content-Type: application/json
Accept: application/json

Example

package main

import (
	"context"
	"fmt"
	"os"
  "encoding/json"
    machine_account_subtypes "github.com/sailpoint-oss/golang-sdk/v3/machine_account_subtypes"
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    xSailPointExperimental := `true` // string | Use this header to enable this experimental API. (default to "true") # string | Use this header to enable this experimental API. (default to "true")
    createsourcesubtypev2requestJson := []byte(`{
          "targetName" : "Active Directory",
          "targetId" : "active-directory",
          "displayName" : "Service Account",
          "description" : "Accounts used by automated services.",
          "targetType" : "CONNECTOR",
          "type" : "MACHINE",
          "classification" : "MACHINE",
          "technicalName" : "service-account"
        }`) // CreateSourceSubtypeV2Request | 

    var createSourceSubtypeV2Request machine_account_subtypes.CreateSourceSubtypeV2Request
    if err := json.Unmarshal(createsourcesubtypev2requestJson, &createSourceSubtypeV2Request); err != nil {
      fmt.Println("Error:", err)
      return
    }
    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    resp, r, err := apiClient.MachineAccountSubtypesAPI.CreateSourceSubtypeV2(context.Background()).XSailPointExperimental(xSailPointExperimental).CreateSourceSubtypeV2Request(createSourceSubtypeV2Request).Execute()
	  //resp, r, err := apiClient.MachineAccountSubtypesAPI.CreateSourceSubtypeV2(context.Background()).XSailPointExperimental(xSailPointExperimental).CreateSourceSubtypeV2Request(createSourceSubtypeV2Request).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `MachineAccountSubtypesAPI.CreateSourceSubtypeV2``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    // response from `CreateSourceSubtypeV2`: SourceSubtypeV2
    fmt.Fprintf(os.Stdout, "Response from `MachineAccountSubtypesAPI.CreateSourceSubtypeV2`: %v\n", resp)
}

[Back to top]

delete-machine-account-subtype-v1

experimental

setting x-sailpoint-experimental header

on the configuration object you can set the x-sailpoint-experimental header to `true' to enable all experimantl endpoints within the SDK. Example:

  configuration = Configuration()
  configuration.Experimental = true

Delete subtype by ID Delete a machine account subtype by subtype ID.

Note: If subtype has approval settings or entitlement for machine account creation enablement then it'll be also deleted.

API Spec

Path Parameters

Name	Type	Description	Notes
ctx	context.Context	context for authentication, logging, cancellation, deadlines, tracing, etc.
subtypeId	string	The ID of the subtype.

Other Parameters

Other parameters are passed through a pointer to a apiDeleteMachineAccountSubtypeV1Request struct via the builder pattern

Name	Type	Description	Notes

xSailPointExperimental | string | Use this header to enable this experimental API. | [default to "true"]

Return type

(empty response body)

HTTP request headers

Content-Type: Not defined
Accept: application/json

Example

package main

import (
	"context"
	"fmt"
	"os"
  
    
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    subtypeId := `6d28b7c1-620c-49c6-b6d5-cbf81eb4b5fa` // string | The ID of the subtype. # string | The ID of the subtype.
    xSailPointExperimental := `true` // string | Use this header to enable this experimental API. (default to "true") # string | Use this header to enable this experimental API. (default to "true")

    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    r, err := apiClient.MachineAccountSubtypesAPI.DeleteMachineAccountSubtypeV1(context.Background(), subtypeId).XSailPointExperimental(xSailPointExperimental).Execute()
	  //r, err := apiClient.MachineAccountSubtypesAPI.DeleteMachineAccountSubtypeV1(context.Background(), subtypeId).XSailPointExperimental(xSailPointExperimental).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `MachineAccountSubtypesAPI.DeleteMachineAccountSubtypeV1``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    
}

[Back to top]

delete-machine-account-subtype-v2

experimental

setting x-sailpoint-experimental header

on the configuration object you can set the x-sailpoint-experimental header to `true' to enable all experimantl endpoints within the SDK. Example:

  configuration = Configuration()
  configuration.Experimental = true

Delete subtype by ID Delete a machine account subtype of any tier by subtype ID. System-managed subtypes, and subtypes still assigned to accounts, cannot be deleted and the request is rejected.

Who can call this API depends on the tier of the stored subtype:

SOURCE: requires the idn:source-subtypes:delete right, held by org admins, source admins and source sub-admins.
CONNECTOR: requires the idn:connector-subtypes:delete right, held by org admins.

A caller without the right for the subtype's tier receives 404, not 403. A malformed ID returns 400.

This API returns 404 when Machine Identity Security or tiered subtype configuration is not enabled for the tenant.

API Spec

Path Parameters

Name	Type	Description	Notes
ctx	context.Context	context for authentication, logging, cancellation, deadlines, tracing, etc.
id	string	The ID of the subtype.

Other Parameters

Other parameters are passed through a pointer to a apiDeleteMachineAccountSubtypeV2Request struct via the builder pattern

Name	Type	Description	Notes

xSailPointExperimental | string | Use this header to enable this experimental API. | [default to "true"]

Return type

(empty response body)

HTTP request headers

Content-Type: Not defined
Accept: application/json

Example

package main

import (
	"context"
	"fmt"
	"os"
  
    
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    id := `43bdd144-4b17-4fce-a744-17c7fd3e717b` // string | The ID of the subtype. # string | The ID of the subtype.
    xSailPointExperimental := `true` // string | Use this header to enable this experimental API. (default to "true") # string | Use this header to enable this experimental API. (default to "true")

    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    r, err := apiClient.MachineAccountSubtypesAPI.DeleteMachineAccountSubtypeV2(context.Background(), id).XSailPointExperimental(xSailPointExperimental).Execute()
	  //r, err := apiClient.MachineAccountSubtypesAPI.DeleteMachineAccountSubtypeV2(context.Background(), id).XSailPointExperimental(xSailPointExperimental).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `MachineAccountSubtypesAPI.DeleteMachineAccountSubtypeV2``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    
}

[Back to top]

delete-source-subtype-provisioning-policy-v2

experimental

setting x-sailpoint-experimental header

on the configuration object you can set the x-sailpoint-experimental header to `true' to enable all experimantl endpoints within the SDK. Example:

  configuration = Configuration()
  configuration.Experimental = true

Delete subtype provisioning policy Delete the machine account creation provisioning policy of a subtype of any tier. Returns 404 when the subtype has no provisioning policy.

Who can call this API depends on the tier of the subtype:

SOURCE: requires the idn:source-subtypes:delete right, held by org admins, source admins and source sub-admins.
CONNECTOR: requires the idn:connector-subtypes:delete right, held by org admins.

A caller without the right for the subtype's tier receives 404, not 403. A malformed ID returns 400.

This API returns 404 when Machine Identity Security or tiered subtype configuration is not enabled for the tenant.

API Spec

Path Parameters

Name	Type	Description	Notes
ctx	context.Context	context for authentication, logging, cancellation, deadlines, tracing, etc.
id	string	The ID of the subtype.

Other Parameters

Other parameters are passed through a pointer to a apiDeleteSourceSubtypeProvisioningPolicyV2Request struct via the builder pattern

Name	Type	Description	Notes

xSailPointExperimental | string | Use this header to enable this experimental API. | [default to "true"]

Return type

(empty response body)

HTTP request headers

Content-Type: Not defined
Accept: application/json

Example

package main

import (
	"context"
	"fmt"
	"os"
  
    
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    id := `43bdd144-4b17-4fce-a744-17c7fd3e717b` // string | The ID of the subtype. # string | The ID of the subtype.
    xSailPointExperimental := `true` // string | Use this header to enable this experimental API. (default to "true") # string | Use this header to enable this experimental API. (default to "true")

    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    r, err := apiClient.MachineAccountSubtypesAPI.DeleteSourceSubtypeProvisioningPolicyV2(context.Background(), id).XSailPointExperimental(xSailPointExperimental).Execute()
	  //r, err := apiClient.MachineAccountSubtypesAPI.DeleteSourceSubtypeProvisioningPolicyV2(context.Background(), id).XSailPointExperimental(xSailPointExperimental).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `MachineAccountSubtypesAPI.DeleteSourceSubtypeProvisioningPolicyV2``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    
}

[Back to top]

get-machine-account-subtype-approval-config-v1

experimental

setting x-sailpoint-experimental header

on the configuration object you can set the x-sailpoint-experimental header to `true' to enable all experimantl endpoints within the SDK. Example:

  configuration = Configuration()
  configuration.Experimental = true

Machine Subtype Approval Config This endpoint retrieves the approval configuration for machine account creation and deletion at the machine subtype level. By providing a specific subtypeId in the path, clients can fetch the approval rules and settings (such as required approvers and comments policy) that govern account creation and deletion for that particular machine subtype. The response includes a MachineAccountSubtypeConfigDto object detailing these configurations, enabling clients to understand or display the approval workflow required for creating and deleting machine accounts of the given subtype. Use this endpoint to get machine subtype level approval config for account creation and deletion.

API Spec

Path Parameters

Name	Type	Description	Notes
ctx	context.Context	context for authentication, logging, cancellation, deadlines, tracing, etc.
subtypeId	string	machine subtype id.

Other Parameters

Other parameters are passed through a pointer to a apiGetMachineAccountSubtypeApprovalConfigV1Request struct via the builder pattern

Name	Type	Description	Notes
xSailPointExperimental	string	Use this header to enable this experimental API.	[default to "true"]

Return type

MachineAccountSubtypeConfigDto

HTTP request headers

Content-Type: Not defined
Accept: application/json

Example

package main

import (
	"context"
	"fmt"
	"os"
  
    
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    xSailPointExperimental := `true` // string | Use this header to enable this experimental API. (default to "true") # string | Use this header to enable this experimental API. (default to "true")
    subtypeId := `ef38f94347e94562b5bb8424a56498d8` // string | machine subtype id. # string | machine subtype id.

    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    resp, r, err := apiClient.MachineAccountSubtypesAPI.GetMachineAccountSubtypeApprovalConfigV1(context.Background(), subtypeId).XSailPointExperimental(xSailPointExperimental).Execute()
	  //resp, r, err := apiClient.MachineAccountSubtypesAPI.GetMachineAccountSubtypeApprovalConfigV1(context.Background(), subtypeId).XSailPointExperimental(xSailPointExperimental).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `MachineAccountSubtypesAPI.GetMachineAccountSubtypeApprovalConfigV1``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    // response from `GetMachineAccountSubtypeApprovalConfigV1`: MachineAccountSubtypeConfigDto
    fmt.Fprintf(os.Stdout, "Response from `MachineAccountSubtypesAPI.GetMachineAccountSubtypeApprovalConfigV1`: %v\n", resp)
}

[Back to top]

get-source-subtype-by-id-v1

experimental

setting x-sailpoint-experimental header

on the configuration object you can set the x-sailpoint-experimental header to `true' to enable all experimantl endpoints within the SDK. Example:

  configuration = Configuration()
  configuration.Experimental = true

Get subtype by ID Get a machine account subtype by subtype ID.

API Spec

Path Parameters

Name	Type	Description	Notes
ctx	context.Context	context for authentication, logging, cancellation, deadlines, tracing, etc.
subtypeId	string	The ID of the subtype.

Other Parameters

Other parameters are passed through a pointer to a apiGetSourceSubtypeByIdV1Request struct via the builder pattern

Name	Type	Description	Notes

xSailPointExperimental | string | Use this header to enable this experimental API. | [default to "true"]

Return type

SourceSubtypeWithSource

HTTP request headers

Content-Type: Not defined
Accept: application/json

Example

package main

import (
	"context"
	"fmt"
	"os"
  
    
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    subtypeId := `6d28b7c1-620c-49c6-b6d5-cbf81eb4b5fa` // string | The ID of the subtype. # string | The ID of the subtype.
    xSailPointExperimental := `true` // string | Use this header to enable this experimental API. (default to "true") # string | Use this header to enable this experimental API. (default to "true")

    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    resp, r, err := apiClient.MachineAccountSubtypesAPI.GetSourceSubtypeByIdV1(context.Background(), subtypeId).XSailPointExperimental(xSailPointExperimental).Execute()
	  //resp, r, err := apiClient.MachineAccountSubtypesAPI.GetSourceSubtypeByIdV1(context.Background(), subtypeId).XSailPointExperimental(xSailPointExperimental).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `MachineAccountSubtypesAPI.GetSourceSubtypeByIdV1``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    // response from `GetSourceSubtypeByIdV1`: SourceSubtypeWithSource
    fmt.Fprintf(os.Stdout, "Response from `MachineAccountSubtypesAPI.GetSourceSubtypeByIdV1`: %v\n", resp)
}

[Back to top]

get-source-subtype-by-id-v2

experimental

setting x-sailpoint-experimental header

on the configuration object you can set the x-sailpoint-experimental header to `true' to enable all experimantl endpoints within the SDK. Example:

  configuration = Configuration()
  configuration.Experimental = true

Get subtype by ID Get a machine account subtype of any tier by subtype ID. The response may include target.supportsProvisioning.

The caller needs the idn:source-subtypes:read right. A malformed ID returns 400.

This API returns 404 when Machine Identity Security or tiered subtype configuration is not enabled for the tenant.

API Spec

Path Parameters

Name	Type	Description	Notes
ctx	context.Context	context for authentication, logging, cancellation, deadlines, tracing, etc.
id	string	The ID of the subtype.

Other Parameters

Other parameters are passed through a pointer to a apiGetSourceSubtypeByIdV2Request struct via the builder pattern

Name	Type	Description	Notes

xSailPointExperimental | string | Use this header to enable this experimental API. | [default to "true"]

Return type

SourceSubtypeV2

HTTP request headers

Content-Type: Not defined
Accept: application/json

Example

package main

import (
	"context"
	"fmt"
	"os"
  
    
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    id := `43bdd144-4b17-4fce-a744-17c7fd3e717b` // string | The ID of the subtype. # string | The ID of the subtype.
    xSailPointExperimental := `true` // string | Use this header to enable this experimental API. (default to "true") # string | Use this header to enable this experimental API. (default to "true")

    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    resp, r, err := apiClient.MachineAccountSubtypesAPI.GetSourceSubtypeByIdV2(context.Background(), id).XSailPointExperimental(xSailPointExperimental).Execute()
	  //resp, r, err := apiClient.MachineAccountSubtypesAPI.GetSourceSubtypeByIdV2(context.Background(), id).XSailPointExperimental(xSailPointExperimental).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `MachineAccountSubtypesAPI.GetSourceSubtypeByIdV2``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    // response from `GetSourceSubtypeByIdV2`: SourceSubtypeV2
    fmt.Fprintf(os.Stdout, "Response from `MachineAccountSubtypesAPI.GetSourceSubtypeByIdV2`: %v\n", resp)
}

[Back to top]

get-source-subtype-provisioning-policy-v2

experimental

setting x-sailpoint-experimental header

on the configuration object you can set the x-sailpoint-experimental header to `true' to enable all experimantl endpoints within the SDK. Example:

  configuration = Configuration()
  configuration.Experimental = true

Get subtype provisioning policy Get the machine account creation provisioning policy of a subtype of any tier. Returns 404 when the subtype has no provisioning policy.

The caller needs the idn:source-subtypes:read right. A malformed ID returns 400.

This API returns 404 when Machine Identity Security or tiered subtype configuration is not enabled for the tenant.

API Spec

Path Parameters

Name	Type	Description	Notes
ctx	context.Context	context for authentication, logging, cancellation, deadlines, tracing, etc.
id	string	The ID of the subtype.

Other Parameters

Other parameters are passed through a pointer to a apiGetSourceSubtypeProvisioningPolicyV2Request struct via the builder pattern

Name	Type	Description	Notes

xSailPointExperimental | string | Use this header to enable this experimental API. | [default to "true"] sourceId | string | ID of the source the subtype belongs to. Supply it for `SOURCE` subtypes so that a policy stored with the source can be found. |

Return type

SubtypeProvisioningPolicy

HTTP request headers

Content-Type: Not defined
Accept: application/json

Example

package main

import (
	"context"
	"fmt"
	"os"
  
    
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    id := `43bdd144-4b17-4fce-a744-17c7fd3e717b` // string | The ID of the subtype. # string | The ID of the subtype.
    xSailPointExperimental := `true` // string | Use this header to enable this experimental API. (default to "true") # string | Use this header to enable this experimental API. (default to "true")
    sourceId := `6d0458373bec4b4b80460992b76016da` // string | ID of the source the subtype belongs to. Supply it for `SOURCE` subtypes so that a policy stored with the source can be found. (optional) # string | ID of the source the subtype belongs to. Supply it for `SOURCE` subtypes so that a policy stored with the source can be found. (optional)

    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    resp, r, err := apiClient.MachineAccountSubtypesAPI.GetSourceSubtypeProvisioningPolicyV2(context.Background(), id).XSailPointExperimental(xSailPointExperimental).Execute()
	  //resp, r, err := apiClient.MachineAccountSubtypesAPI.GetSourceSubtypeProvisioningPolicyV2(context.Background(), id).XSailPointExperimental(xSailPointExperimental).SourceId(sourceId).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `MachineAccountSubtypesAPI.GetSourceSubtypeProvisioningPolicyV2``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    // response from `GetSourceSubtypeProvisioningPolicyV2`: SubtypeProvisioningPolicy
    fmt.Fprintf(os.Stdout, "Response from `MachineAccountSubtypesAPI.GetSourceSubtypeProvisioningPolicyV2`: %v\n", resp)
}

[Back to top]

list-source-subtype-targets-v2

experimental

setting x-sailpoint-experimental header

on the configuration object you can set the x-sailpoint-experimental header to `true' to enable all experimantl endpoints within the SDK. Example:

  configuration = Configuration()
  configuration.Experimental = true

List subtype targets List the targets that have machine account subtypes, with subtype and source counts for each.

A targetType filter is required. targetType eq "CONNECTOR" returns one item per connector type. targetType eq "SOURCE" returns one item per source subtype. A missing or unsupported targetType filter returns 400.

The caller needs the idn:source-subtypes:read right.

This API returns 404 when Machine Identity Security or tiered subtype configuration is not enabled for the tenant.

API Spec

Path Parameters

Other Parameters

Other parameters are passed through a pointer to a apiListSourceSubtypeTargetsV2Request struct via the builder pattern

Name	Type	Description	Notes
filters	string	Filter results using the standard syntax described in V3 API Standard Collection Parameters Filtering is supported for the following fields and operators: targetType: eq targetName: eq, sw A `targetType` filter with the value `CONNECTOR` or `SOURCE` is required.
xSailPointExperimental	string	Use this header to enable this experimental API.	[default to "true"]
limit	int32	Max number of results to return. See API Standard Collection Parameters for more information.	[default to 250]
offset	int32	Offset into the full result set. Usually specified with limit to paginate through the results. See API Standard Collection Parameters for more information.	[default to 0]
count	bool	If true it will populate the X-Total-Count response header with the number of results that would be returned if limit and offset were ignored. Since requesting a total count can have a performance impact, it is recommended not to send count=true if that value will not be used. See API Standard Collection Parameters for more information.	[default to false]
sorters	string	Sort results using the standard syntax described in V3 API Standard Collection Parameters Sorting is supported for the following fields: targetType, targetName, subtypeCount, sourceCount Results are sorted by targetName ascending by default.

Return type

[]SubtypeTargetSummary

HTTP request headers

Content-Type: Not defined
Accept: application/json

Example

package main

import (
	"context"
	"fmt"
	"os"
  
    
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    filters := `targetType eq "CONNECTOR"` // string | Filter results using the standard syntax described in [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters#filtering-results)  Filtering is supported for the following fields and operators:  **targetType**: *eq*  **targetName**: *eq, sw*  A `targetType` filter with the value `CONNECTOR` or `SOURCE` is required. # string | Filter results using the standard syntax described in [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters#filtering-results)  Filtering is supported for the following fields and operators:  **targetType**: *eq*  **targetName**: *eq, sw*  A `targetType` filter with the value `CONNECTOR` or `SOURCE` is required.
    xSailPointExperimental := `true` // string | Use this header to enable this experimental API. (default to "true") # string | Use this header to enable this experimental API. (default to "true")
    limit := 250 // int32 | Max number of results to return. See [API Standard Collection Parameters](https://developer.sailpoint.com/docs/api/standard-collection-parameters) for more information. (optional) (default to 250) # int32 | Max number of results to return. See [API Standard Collection Parameters](https://developer.sailpoint.com/docs/api/standard-collection-parameters) for more information. (optional) (default to 250)
    offset := 0 // int32 | Offset into the full result set. Usually specified with *limit* to paginate through the results. See [API Standard Collection Parameters](https://developer.sailpoint.com/docs/api/standard-collection-parameters) for more information. (optional) (default to 0) # int32 | Offset into the full result set. Usually specified with *limit* to paginate through the results. See [API Standard Collection Parameters](https://developer.sailpoint.com/docs/api/standard-collection-parameters) for more information. (optional) (default to 0)
    count := true // bool | If *true* it will populate the *X-Total-Count* response header with the number of results that would be returned if *limit* and *offset* were ignored.  Since requesting a total count can have a performance impact, it is recommended not to send **count=true** if that value will not be used.  See [API Standard Collection Parameters](https://developer.sailpoint.com/docs/api/standard-collection-parameters) for more information. (optional) (default to false) # bool | If *true* it will populate the *X-Total-Count* response header with the number of results that would be returned if *limit* and *offset* were ignored.  Since requesting a total count can have a performance impact, it is recommended not to send **count=true** if that value will not be used.  See [API Standard Collection Parameters](https://developer.sailpoint.com/docs/api/standard-collection-parameters) for more information. (optional) (default to false)
    sorters := `-subtypeCount` // string | Sort results using the standard syntax described in [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters#sorting-results)  Sorting is supported for the following fields: **targetType, targetName, subtypeCount, sourceCount**  Results are sorted by **targetName** ascending by default. (optional) # string | Sort results using the standard syntax described in [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters#sorting-results)  Sorting is supported for the following fields: **targetType, targetName, subtypeCount, sourceCount**  Results are sorted by **targetName** ascending by default. (optional)

    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    resp, r, err := apiClient.MachineAccountSubtypesAPI.ListSourceSubtypeTargetsV2(context.Background()).Filters(filters).XSailPointExperimental(xSailPointExperimental).Execute()
	  //resp, r, err := apiClient.MachineAccountSubtypesAPI.ListSourceSubtypeTargetsV2(context.Background()).Filters(filters).XSailPointExperimental(xSailPointExperimental).Limit(limit).Offset(offset).Count(count).Sorters(sorters).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `MachineAccountSubtypesAPI.ListSourceSubtypeTargetsV2``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    // response from `ListSourceSubtypeTargetsV2`: []SubtypeTargetSummary
    fmt.Fprintf(os.Stdout, "Response from `MachineAccountSubtypesAPI.ListSourceSubtypeTargetsV2`: %v\n", resp)
}

[Back to top]

list-source-subtypes-v1

experimental

setting x-sailpoint-experimental header

on the configuration object you can set the x-sailpoint-experimental header to `true' to enable all experimantl endpoints within the SDK. Example:

  configuration = Configuration()
  configuration.Experimental = true

Retrieve all subtypes Get all machine account subtypes.

API Spec

Path Parameters

Other Parameters

Other parameters are passed through a pointer to a apiListSourceSubtypesV1Request struct via the builder pattern

Name	Type	Description	Notes
xSailPointExperimental	string	Use this header to enable this experimental API.	[default to "true"]
filters	string	Filter results using the standard syntax described in API Standard Collection Parameters Filtering is supported for the following fields and operators: id: eq, in, sw displayName: eq, sw technicalName: eq, sw source.id: eq, in
sorters	string	Sort results using the standard syntax described in API Standard Collection Parameters Sorting is supported for the following fields: displayName, technicalName
count	bool	If true it will populate the X-Total-Count response header with the number of results that would be returned if limit and offset were ignored. Since requesting a total count can have a performance impact, it is recommended not to send count=true if that value will not be used. See API Standard Collection Parameters for more information.	[default to false]
limit	int32	Max number of results to return. See API Standard Collection Parameters for more information.	[default to 250]
offset	int32	Offset into the full result set. Usually specified with limit to paginate through the results. See API Standard Collection Parameters for more information.	[default to 0]

Return type

[]SourceSubtypeWithSource

HTTP request headers

Content-Type: Not defined
Accept: application/json

Example

package main

import (
	"context"
	"fmt"
	"os"
  
    
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    xSailPointExperimental := `true` // string | Use this header to enable this experimental API. (default to "true") # string | Use this header to enable this experimental API. (default to "true")
    filters := `displayName eq "sail"` // string | Filter results using the standard syntax described in [API Standard Collection Parameters](https://developer.sailpoint.com/docs/api/standard-collection-parameters#filtering-results)  Filtering is supported for the following fields and operators:  **id**: *eq, in, sw*  **displayName**: *eq, sw*  **technicalName**: *eq, sw*  **source.id**: *eq, in* (optional) # string | Filter results using the standard syntax described in [API Standard Collection Parameters](https://developer.sailpoint.com/docs/api/standard-collection-parameters#filtering-results)  Filtering is supported for the following fields and operators:  **id**: *eq, in, sw*  **displayName**: *eq, sw*  **technicalName**: *eq, sw*  **source.id**: *eq, in* (optional)
    sorters := `displayName` // string | Sort results using the standard syntax described in [API Standard Collection Parameters](https://developer.sailpoint.com/docs/api/standard-collection-parameters#sorting-results)  Sorting is supported for the following fields: **displayName, technicalName** (optional) # string | Sort results using the standard syntax described in [API Standard Collection Parameters](https://developer.sailpoint.com/docs/api/standard-collection-parameters#sorting-results)  Sorting is supported for the following fields: **displayName, technicalName** (optional)
    count := true // bool | If *true* it will populate the *X-Total-Count* response header with the number of results that would be returned if *limit* and *offset* were ignored.  Since requesting a total count can have a performance impact, it is recommended not to send **count=true** if that value will not be used.  See [API Standard Collection Parameters](https://developer.sailpoint.com/docs/api/standard-collection-parameters) for more information. (optional) (default to false) # bool | If *true* it will populate the *X-Total-Count* response header with the number of results that would be returned if *limit* and *offset* were ignored.  Since requesting a total count can have a performance impact, it is recommended not to send **count=true** if that value will not be used.  See [API Standard Collection Parameters](https://developer.sailpoint.com/docs/api/standard-collection-parameters) for more information. (optional) (default to false)
    limit := 250 // int32 | Max number of results to return. See [API Standard Collection Parameters](https://developer.sailpoint.com/docs/api/standard-collection-parameters) for more information. (optional) (default to 250) # int32 | Max number of results to return. See [API Standard Collection Parameters](https://developer.sailpoint.com/docs/api/standard-collection-parameters) for more information. (optional) (default to 250)
    offset := 0 // int32 | Offset into the full result set. Usually specified with *limit* to paginate through the results. See [API Standard Collection Parameters](https://developer.sailpoint.com/docs/api/standard-collection-parameters) for more information. (optional) (default to 0) # int32 | Offset into the full result set. Usually specified with *limit* to paginate through the results. See [API Standard Collection Parameters](https://developer.sailpoint.com/docs/api/standard-collection-parameters) for more information. (optional) (default to 0)

    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    resp, r, err := apiClient.MachineAccountSubtypesAPI.ListSourceSubtypesV1(context.Background()).XSailPointExperimental(xSailPointExperimental).Execute()
	  //resp, r, err := apiClient.MachineAccountSubtypesAPI.ListSourceSubtypesV1(context.Background()).XSailPointExperimental(xSailPointExperimental).Filters(filters).Sorters(sorters).Count(count).Limit(limit).Offset(offset).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `MachineAccountSubtypesAPI.ListSourceSubtypesV1``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    // response from `ListSourceSubtypesV1`: []SourceSubtypeWithSource
    fmt.Fprintf(os.Stdout, "Response from `MachineAccountSubtypesAPI.ListSourceSubtypesV1`: %v\n", resp)
}

[Back to top]

list-source-subtypes-v2

experimental

setting x-sailpoint-experimental header

on the configuration object you can set the x-sailpoint-experimental header to `true' to enable all experimantl endpoints within the SDK. Example:

  configuration = Configuration()
  configuration.Experimental = true

List subtypes List machine account subtypes defined at the source tier and the connector tier.

Without sourceId, the API lists every subtype in the tenant, and filters and sorters apply.

With sourceId, the API returns the source's effective subtypes: the subtypes defined for the source plus the subtypes defined for the source's connector type. When a source subtype has the same technical name as a connector subtype, only the source subtype is returned and its origin is CONNECTOR. filters cannot be used in this mode. Use targetType to return only one tier of the effective set. An unknown sourceId returns 404.

With sourceId and effectiveSet=false, the API returns only the subtypes defined for that source, and filters apply.

The caller needs the idn:source-subtypes:read right.

This API returns 404 when Machine Identity Security or tiered subtype configuration is not enabled for the tenant.

API Spec

Path Parameters

Other Parameters

Other parameters are passed through a pointer to a apiListSourceSubtypesV2Request struct via the builder pattern

Name	Type	Description	Notes
xSailPointExperimental	string	Use this header to enable this experimental API.	[default to "true"]
sourceId	string	ID of a source. When supplied, the API returns subtypes for that source instead of the whole tenant.
effectiveSet	bool	Controls what is returned for `sourceId`. When `true`, which is the default when `sourceId` is supplied, the API returns the source's effective subtypes across both tiers. When `false`, the API returns only the subtypes defined for the source. Passing `effectiveSet=true` explicitly without `sourceId` returns `400`.	[default to true]
targetType	string	Returns only effective subtypes of this tier. Requires `sourceId`, and cannot be combined with `effectiveSet=false`; otherwise the API returns `400`.
includeConfigs	bool	When `true`, each item includes a summary of its machine account creation configuration in `config`.	[default to false]
limit	int32	Max number of results to return. See API Standard Collection Parameters for more information.	[default to 250]
offset	int32	Offset into the full result set. Usually specified with limit to paginate through the results. See API Standard Collection Parameters for more information.	[default to 0]
count	bool	If true it will populate the X-Total-Count response header with the number of results that would be returned if limit and offset were ignored. Since requesting a total count can have a performance impact, it is recommended not to send count=true if that value will not be used. See API Standard Collection Parameters for more information.	[default to false]
filters	string	Filter results using the standard syntax described in V3 API Standard Collection Parameters Filtering is supported for the following fields and operators: id: eq, ne, in technicalName: eq, ne, in, sw, co displayName: eq, ne, in, sw, co source.id: eq, ne, in, sw, co targetType: eq, ne, in, sw, co targetId: eq, ne, in, sw, co targetName: eq, ne, in, sw, co, isnull classification: eq, ne, in, sw, co type: eq, ne, in, sw, co created: gt, ge, lt, le modified: gt, ge, lt, le Filters cannot be used with `sourceId` unless `effectiveSet=false`; otherwise the API returns `400`.
sorters	string	Sort results using the standard syntax described in V3 API Standard Collection Parameters Sorting is supported for the following fields: id, technicalName, displayName, source.id, targetType, targetId, targetName, classification, type, created, modified

Return type

[]SourceSubtypeV2WithConfig

HTTP request headers

Content-Type: Not defined
Accept: application/json

Example

package main

import (
	"context"
	"fmt"
	"os"
  
    
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    xSailPointExperimental := `true` // string | Use this header to enable this experimental API. (default to "true") # string | Use this header to enable this experimental API. (default to "true")
    sourceId := `6d0458373bec4b4b80460992b76016da` // string | ID of a source. When supplied, the API returns subtypes for that source instead of the whole tenant. (optional) # string | ID of a source. When supplied, the API returns subtypes for that source instead of the whole tenant. (optional)
    effectiveSet := true // bool | Controls what is returned for `sourceId`. When `true`, which is the default when `sourceId` is supplied, the API returns the source's effective subtypes across both tiers. When `false`, the API returns only the subtypes defined for the source. Passing `effectiveSet=true` explicitly without `sourceId` returns `400`. (optional) (default to true) # bool | Controls what is returned for `sourceId`. When `true`, which is the default when `sourceId` is supplied, the API returns the source's effective subtypes across both tiers. When `false`, the API returns only the subtypes defined for the source. Passing `effectiveSet=true` explicitly without `sourceId` returns `400`. (optional) (default to true)
    targetType := `CONNECTOR` // string | Returns only effective subtypes of this tier. Requires `sourceId`, and cannot be combined with `effectiveSet=false`; otherwise the API returns `400`. (optional) # string | Returns only effective subtypes of this tier. Requires `sourceId`, and cannot be combined with `effectiveSet=false`; otherwise the API returns `400`. (optional)
    includeConfigs := false // bool | When `true`, each item includes a summary of its machine account creation configuration in `config`. (optional) (default to false) # bool | When `true`, each item includes a summary of its machine account creation configuration in `config`. (optional) (default to false)
    limit := 250 // int32 | Max number of results to return. See [API Standard Collection Parameters](https://developer.sailpoint.com/docs/api/standard-collection-parameters) for more information. (optional) (default to 250) # int32 | Max number of results to return. See [API Standard Collection Parameters](https://developer.sailpoint.com/docs/api/standard-collection-parameters) for more information. (optional) (default to 250)
    offset := 0 // int32 | Offset into the full result set. Usually specified with *limit* to paginate through the results. See [API Standard Collection Parameters](https://developer.sailpoint.com/docs/api/standard-collection-parameters) for more information. (optional) (default to 0) # int32 | Offset into the full result set. Usually specified with *limit* to paginate through the results. See [API Standard Collection Parameters](https://developer.sailpoint.com/docs/api/standard-collection-parameters) for more information. (optional) (default to 0)
    count := true // bool | If *true* it will populate the *X-Total-Count* response header with the number of results that would be returned if *limit* and *offset* were ignored.  Since requesting a total count can have a performance impact, it is recommended not to send **count=true** if that value will not be used.  See [API Standard Collection Parameters](https://developer.sailpoint.com/docs/api/standard-collection-parameters) for more information. (optional) (default to false) # bool | If *true* it will populate the *X-Total-Count* response header with the number of results that would be returned if *limit* and *offset* were ignored.  Since requesting a total count can have a performance impact, it is recommended not to send **count=true** if that value will not be used.  See [API Standard Collection Parameters](https://developer.sailpoint.com/docs/api/standard-collection-parameters) for more information. (optional) (default to false)
    filters := `targetType eq "CONNECTOR"` // string | Filter results using the standard syntax described in [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters#filtering-results)  Filtering is supported for the following fields and operators:  **id**: *eq, ne, in*  **technicalName**: *eq, ne, in, sw, co*  **displayName**: *eq, ne, in, sw, co*  **source.id**: *eq, ne, in, sw, co*  **targetType**: *eq, ne, in, sw, co*  **targetId**: *eq, ne, in, sw, co*  **targetName**: *eq, ne, in, sw, co, isnull*  **classification**: *eq, ne, in, sw, co*  **type**: *eq, ne, in, sw, co*  **created**: *gt, ge, lt, le*  **modified**: *gt, ge, lt, le*  Filters cannot be used with `sourceId` unless `effectiveSet=false`; otherwise the API returns `400`. (optional) # string | Filter results using the standard syntax described in [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters#filtering-results)  Filtering is supported for the following fields and operators:  **id**: *eq, ne, in*  **technicalName**: *eq, ne, in, sw, co*  **displayName**: *eq, ne, in, sw, co*  **source.id**: *eq, ne, in, sw, co*  **targetType**: *eq, ne, in, sw, co*  **targetId**: *eq, ne, in, sw, co*  **targetName**: *eq, ne, in, sw, co, isnull*  **classification**: *eq, ne, in, sw, co*  **type**: *eq, ne, in, sw, co*  **created**: *gt, ge, lt, le*  **modified**: *gt, ge, lt, le*  Filters cannot be used with `sourceId` unless `effectiveSet=false`; otherwise the API returns `400`. (optional)
    sorters := `displayName` // string | Sort results using the standard syntax described in [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters#sorting-results)  Sorting is supported for the following fields: **id, technicalName, displayName, source.id, targetType, targetId, targetName, classification, type, created, modified** (optional) # string | Sort results using the standard syntax described in [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters#sorting-results)  Sorting is supported for the following fields: **id, technicalName, displayName, source.id, targetType, targetId, targetName, classification, type, created, modified** (optional)

    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    resp, r, err := apiClient.MachineAccountSubtypesAPI.ListSourceSubtypesV2(context.Background()).XSailPointExperimental(xSailPointExperimental).Execute()
	  //resp, r, err := apiClient.MachineAccountSubtypesAPI.ListSourceSubtypesV2(context.Background()).XSailPointExperimental(xSailPointExperimental).SourceId(sourceId).EffectiveSet(effectiveSet).TargetType(targetType).IncludeConfigs(includeConfigs).Limit(limit).Offset(offset).Count(count).Filters(filters).Sorters(sorters).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `MachineAccountSubtypesAPI.ListSourceSubtypesV2``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    // response from `ListSourceSubtypesV2`: []SourceSubtypeV2WithConfig
    fmt.Fprintf(os.Stdout, "Response from `MachineAccountSubtypesAPI.ListSourceSubtypesV2`: %v\n", resp)
}

[Back to top]

load-bulk-source-subtypes-v1

experimental

setting x-sailpoint-experimental header

on the configuration object you can set the x-sailpoint-experimental header to `true' to enable all experimantl endpoints within the SDK. Example:

  configuration = Configuration()
  configuration.Experimental = true

Bulk Retrieve of Source Subtypes This endpoint retrieves the subtypes for given subtypeIds.

API Spec

Path Parameters

Other Parameters

Other parameters are passed through a pointer to a apiLoadBulkSourceSubtypesV1Request struct via the builder pattern

Name	Type	Description	Notes
xSailPointExperimental	string	Use this header to enable this experimental API.	[default to "true"]
requestBody	[]string

Return type

[]SourceSubtypeWithSource

HTTP request headers

Content-Type: application/json
Accept: application/json

Example

package main

import (
	"context"
	"fmt"
	"os"
  "encoding/json"
    machine_account_subtypes "github.com/sailpoint-oss/golang-sdk/v3/machine_account_subtypes"
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    xSailPointExperimental := `true` // string | Use this header to enable this experimental API. (default to "true") # string | Use this header to enable this experimental API. (default to "true")
    requestbody := []byte(``) // []string | 

    var requestBody []machine_account_subtypes.RequestBody
    if err := json.Unmarshal(requestbodyJson, &requestBody); err != nil {
      fmt.Println("Error:", err)
      return
    }
    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    resp, r, err := apiClient.MachineAccountSubtypesAPI.LoadBulkSourceSubtypesV1(context.Background()).XSailPointExperimental(xSailPointExperimental).RequestBody(requestBody).Execute()
	  //resp, r, err := apiClient.MachineAccountSubtypesAPI.LoadBulkSourceSubtypesV1(context.Background()).XSailPointExperimental(xSailPointExperimental).RequestBody(requestBody).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `MachineAccountSubtypesAPI.LoadBulkSourceSubtypesV1``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    // response from `LoadBulkSourceSubtypesV1`: []SourceSubtypeWithSource
    fmt.Fprintf(os.Stdout, "Response from `MachineAccountSubtypesAPI.LoadBulkSourceSubtypesV1`: %v\n", resp)
}

[Back to top]

patch-machine-account-subtype-v1

experimental

setting x-sailpoint-experimental header

on the configuration object you can set the x-sailpoint-experimental header to `true' to enable all experimantl endpoints within the SDK. Example:

  configuration = Configuration()
  configuration.Experimental = true

Patch subtype by ID Update fields of a machine account subtype by subtype ID. Patchable fields only include: displayName, description.

API Spec

Path Parameters

Name	Type	Description	Notes
ctx	context.Context	context for authentication, logging, cancellation, deadlines, tracing, etc.
subtypeId	string	The ID of the subtype.

Other Parameters

Other parameters are passed through a pointer to a apiPatchMachineAccountSubtypeV1Request struct via the builder pattern

Name	Type	Description	Notes

xSailPointExperimental | string | Use this header to enable this experimental API. | [default to "true"] requestBody | []map[string]interface{} | A JSON of updated values JSON Patch standard. |

Return type

SourceSubtypeWithSource

HTTP request headers

Content-Type: application/json-patch+json
Accept: application/json

Example

package main

import (
	"context"
	"fmt"
	"os"
  "encoding/json"
    machine_account_subtypes "github.com/sailpoint-oss/golang-sdk/v3/machine_account_subtypes"
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    subtypeId := `6d28b7c1-620c-49c6-b6d5-cbf81eb4b5fa` // string | The ID of the subtype. # string | The ID of the subtype.
    xSailPointExperimental := `true` // string | Use this header to enable this experimental API. (default to "true") # string | Use this header to enable this experimental API. (default to "true")
    requestbody := []byte(`[{"op":"replace","path":"/displayName","value":"Test New DisplayName"}]`) // []map[string]interface{} | A JSON of updated values [JSON Patch](https://tools.ietf.org/html/rfc6902) standard.

    var requestBody []machine_account_subtypes.RequestBody
    if err := json.Unmarshal(requestbodyJson, &requestBody); err != nil {
      fmt.Println("Error:", err)
      return
    }
    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    resp, r, err := apiClient.MachineAccountSubtypesAPI.PatchMachineAccountSubtypeV1(context.Background(), subtypeId).XSailPointExperimental(xSailPointExperimental).RequestBody(requestBody).Execute()
	  //resp, r, err := apiClient.MachineAccountSubtypesAPI.PatchMachineAccountSubtypeV1(context.Background(), subtypeId).XSailPointExperimental(xSailPointExperimental).RequestBody(requestBody).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `MachineAccountSubtypesAPI.PatchMachineAccountSubtypeV1``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    // response from `PatchMachineAccountSubtypeV1`: SourceSubtypeWithSource
    fmt.Fprintf(os.Stdout, "Response from `MachineAccountSubtypesAPI.PatchMachineAccountSubtypeV1`: %v\n", resp)
}

[Back to top]

patch-machine-account-subtype-v2

experimental

setting x-sailpoint-experimental header

on the configuration object you can set the x-sailpoint-experimental header to `true' to enable all experimantl endpoints within the SDK. Example:

  configuration = Configuration()
  configuration.Experimental = true

Patch subtype by ID Update a machine account subtype of any tier by subtype ID, using the JSON Patch standard.

Only displayName and description are patchable, and both must remain present. Changing targetType, targetId, profile, classification, type or technicalName returns 400; to move a subtype to another tier or target, delete it and create a new one.

Who can call this API depends on the tier of the stored subtype:

SOURCE: requires the idn:source-subtypes:update right, held by org admins, source admins and source sub-admins.
CONNECTOR: requires the idn:connector-subtypes:update right, held by org admins.

A caller without the right for the subtype's tier receives 404, not 403. A malformed ID returns 400.

This API returns 404 when Machine Identity Security or tiered subtype configuration is not enabled for the tenant.

API Spec

Path Parameters

Name	Type	Description	Notes
ctx	context.Context	context for authentication, logging, cancellation, deadlines, tracing, etc.
id	string	The ID of the subtype.

Other Parameters

Other parameters are passed through a pointer to a apiPatchMachineAccountSubtypeV2Request struct via the builder pattern

Name	Type	Description	Notes

Return type

SourceSubtypeV2

HTTP request headers

Content-Type: application/json-patch+json
Accept: application/json

Example

package main

import (
	"context"
	"fmt"
	"os"
  "encoding/json"
    machine_account_subtypes "github.com/sailpoint-oss/golang-sdk/v3/machine_account_subtypes"
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    id := `43bdd144-4b17-4fce-a744-17c7fd3e717b` // string | The ID of the subtype. # string | The ID of the subtype.
    xSailPointExperimental := `true` // string | Use this header to enable this experimental API. (default to "true") # string | Use this header to enable this experimental API. (default to "true")
    jsonpatchoperationJson := []byte(`[{"op":"replace","path":"/displayName","value":"Service Account"},{"op":"replace","path":"/description","value":"Accounts used by automated services."}]`) // []JsonPatchOperation | A list of subtype update operations according to the [JSON Patch](https://tools.ietf.org/html/rfc6902) standard.

    var jsonPatchOperation []machine_account_subtypes.JsonPatchOperation
    if err := json.Unmarshal(jsonpatchoperationJson, &jsonPatchOperation); err != nil {
      fmt.Println("Error:", err)
      return
    }
    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    resp, r, err := apiClient.MachineAccountSubtypesAPI.PatchMachineAccountSubtypeV2(context.Background(), id).XSailPointExperimental(xSailPointExperimental).JsonPatchOperation(jsonPatchOperation).Execute()
	  //resp, r, err := apiClient.MachineAccountSubtypesAPI.PatchMachineAccountSubtypeV2(context.Background(), id).XSailPointExperimental(xSailPointExperimental).JsonPatchOperation(jsonPatchOperation).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `MachineAccountSubtypesAPI.PatchMachineAccountSubtypeV2``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    // response from `PatchMachineAccountSubtypeV2`: SourceSubtypeV2
    fmt.Fprintf(os.Stdout, "Response from `MachineAccountSubtypesAPI.PatchMachineAccountSubtypeV2`: %v\n", resp)
}

[Back to top]

patch-source-subtype-provisioning-policy-v2

experimental

setting x-sailpoint-experimental header

on the configuration object you can set the x-sailpoint-experimental header to `true' to enable all experimantl endpoints within the SDK. Example:

  configuration = Configuration()
  configuration.Experimental = true

Patch subtype provisioning policy Update the machine account creation provisioning policy of a subtype of any tier, using the JSON Patch standard. Only name, description and fields are patchable. Returns 404 when the subtype has no provisioning policy.

Who can call this API depends on the tier of the subtype:

SOURCE: requires the idn:source-subtypes:update right, held by org admins, source admins and source sub-admins.
CONNECTOR: requires the idn:connector-subtypes:update right, held by org admins.

A caller without the right for the subtype's tier receives 404, not 403. A malformed ID returns 400.

This API returns 404 when Machine Identity Security or tiered subtype configuration is not enabled for the tenant.

API Spec

Path Parameters

Name	Type	Description	Notes
ctx	context.Context	context for authentication, logging, cancellation, deadlines, tracing, etc.
id	string	The ID of the subtype.

Other Parameters

Other parameters are passed through a pointer to a apiPatchSourceSubtypeProvisioningPolicyV2Request struct via the builder pattern

Name	Type	Description	Notes

Return type

SubtypeProvisioningPolicy

HTTP request headers

Content-Type: application/json-patch+json
Accept: application/json

Example

package main

import (
	"context"
	"fmt"
	"os"
  "encoding/json"
    machine_account_subtypes "github.com/sailpoint-oss/golang-sdk/v3/machine_account_subtypes"
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    id := `43bdd144-4b17-4fce-a744-17c7fd3e717b` // string | The ID of the subtype. # string | The ID of the subtype.
    xSailPointExperimental := `true` // string | Use this header to enable this experimental API. (default to "true") # string | Use this header to enable this experimental API. (default to "true")
    jsonpatchoperationJson := []byte(`[{"op":"replace","path":"/description","value":"Fields collected when creating a service account."}]`) // []JsonPatchOperation | A list of policy update operations according to the [JSON Patch](https://tools.ietf.org/html/rfc6902) standard.

    var jsonPatchOperation []machine_account_subtypes.JsonPatchOperation
    if err := json.Unmarshal(jsonpatchoperationJson, &jsonPatchOperation); err != nil {
      fmt.Println("Error:", err)
      return
    }
    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    resp, r, err := apiClient.MachineAccountSubtypesAPI.PatchSourceSubtypeProvisioningPolicyV2(context.Background(), id).XSailPointExperimental(xSailPointExperimental).JsonPatchOperation(jsonPatchOperation).Execute()
	  //resp, r, err := apiClient.MachineAccountSubtypesAPI.PatchSourceSubtypeProvisioningPolicyV2(context.Background(), id).XSailPointExperimental(xSailPointExperimental).JsonPatchOperation(jsonPatchOperation).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `MachineAccountSubtypesAPI.PatchSourceSubtypeProvisioningPolicyV2``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    // response from `PatchSourceSubtypeProvisioningPolicyV2`: SubtypeProvisioningPolicy
    fmt.Fprintf(os.Stdout, "Response from `MachineAccountSubtypesAPI.PatchSourceSubtypeProvisioningPolicyV2`: %v\n", resp)
}

[Back to top]

update-machine-account-subtype-approval-config-v1

experimental

setting x-sailpoint-experimental header

on the configuration object you can set the x-sailpoint-experimental header to `true' to enable all experimantl endpoints within the SDK. Example:

  configuration = Configuration()
  configuration.Experimental = true

Machine Subtype Approval Config Updates the approval configuration for machine account deletion at the specified machine subtype level. This endpoint allows clients to modify approval rules and settings (such as required approvers and comments policy) for account creation and deletion workflows associated with a given subtypeId. Use this to customize or enforce approval requirements for creating and deleting machine accounts of a particular subtype.

API Spec

Path Parameters

Name	Type	Description	Notes
ctx	context.Context	context for authentication, logging, cancellation, deadlines, tracing, etc.
subtypeId	string	machine account subtype ID.

Other Parameters

Other parameters are passed through a pointer to a apiUpdateMachineAccountSubtypeApprovalConfigV1Request struct via the builder pattern

Name	Type	Description	Notes
xSailPointExperimental	string	Use this header to enable this experimental API.	[default to "true"]

jsonPatchOperation | []JsonPatchOperation | The JSONPatch payload used to update the object. |

Return type

MachineAccountSubtypeConfigDto

HTTP request headers

Content-Type: application/json-patch+json
Accept: application/json

Example

package main

import (
	"context"
	"fmt"
	"os"
  "encoding/json"
    machine_account_subtypes "github.com/sailpoint-oss/golang-sdk/v3/machine_account_subtypes"
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    xSailPointExperimental := `true` // string | Use this header to enable this experimental API. (default to "true") # string | Use this header to enable this experimental API. (default to "true")
    subtypeId := `00eebcf881994e419d72e757fd30dc0e` // string | machine account subtype ID. # string | machine account subtype ID.
    jsonpatchoperationJson := []byte(``) // []JsonPatchOperation | The JSONPatch payload used to update the object.

    var jsonPatchOperation []machine_account_subtypes.JsonPatchOperation
    if err := json.Unmarshal(jsonpatchoperationJson, &jsonPatchOperation); err != nil {
      fmt.Println("Error:", err)
      return
    }
    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    resp, r, err := apiClient.MachineAccountSubtypesAPI.UpdateMachineAccountSubtypeApprovalConfigV1(context.Background(), subtypeId).XSailPointExperimental(xSailPointExperimental).JsonPatchOperation(jsonPatchOperation).Execute()
	  //resp, r, err := apiClient.MachineAccountSubtypesAPI.UpdateMachineAccountSubtypeApprovalConfigV1(context.Background(), subtypeId).XSailPointExperimental(xSailPointExperimental).JsonPatchOperation(jsonPatchOperation).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `MachineAccountSubtypesAPI.UpdateMachineAccountSubtypeApprovalConfigV1``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    // response from `UpdateMachineAccountSubtypeApprovalConfigV1`: MachineAccountSubtypeConfigDto
    fmt.Fprintf(os.Stdout, "Response from `MachineAccountSubtypesAPI.UpdateMachineAccountSubtypeApprovalConfigV1`: %v\n", resp)
}

[Back to top]

create-source-subtype-override-v2​

Path Parameters​

Other Parameters​

Return type​

HTTP request headers​

Example​

create-source-subtype-provisioning-policy-v2​

Path Parameters​

Other Parameters​

Return type​

HTTP request headers​

Example​

create-source-subtype-v1​

Path Parameters​

Other Parameters​

Return type​

HTTP request headers​

Example​

create-source-subtype-v2​

Path Parameters​

Other Parameters​

Return type​

HTTP request headers​

Example​

delete-machine-account-subtype-v1​

Path Parameters​

Other Parameters​

Return type​

HTTP request headers​

Example​

delete-machine-account-subtype-v2​

Path Parameters​

Other Parameters​

Return type​

HTTP request headers​

Example​

delete-source-subtype-provisioning-policy-v2​

Path Parameters​

Other Parameters​

Return type​

HTTP request headers​

Example​

get-machine-account-subtype-approval-config-v1​

Path Parameters​

Other Parameters​

Return type​

HTTP request headers​

Example​

get-source-subtype-by-id-v1​

Path Parameters​

Other Parameters​

Return type​

HTTP request headers​

Example​

get-source-subtype-by-id-v2​

Path Parameters​

Other Parameters​

Return type​

HTTP request headers​

Example​

get-source-subtype-provisioning-policy-v2​

Path Parameters​

Other Parameters​

Return type​

HTTP request headers​

Example​

list-source-subtype-targets-v2​

Path Parameters​

Other Parameters​

Return type​

HTTP request headers​

Example​

list-source-subtypes-v1​

Path Parameters​

Other Parameters​

Return type​

HTTP request headers​

Example​

list-source-subtypes-v2​

Path Parameters​

create-source-subtype-override-v2

Path Parameters

Other Parameters

Return type

HTTP request headers

Example

create-source-subtype-provisioning-policy-v2

Path Parameters

Other Parameters

Return type

HTTP request headers

Example

create-source-subtype-v1

Path Parameters

Other Parameters

Return type

HTTP request headers

Example

create-source-subtype-v2

Path Parameters

Other Parameters

Return type

HTTP request headers

Example

delete-machine-account-subtype-v1

Path Parameters

Other Parameters

Return type

HTTP request headers

Example

delete-machine-account-subtype-v2

Path Parameters

Other Parameters

Return type

HTTP request headers

Example

delete-source-subtype-provisioning-policy-v2

Path Parameters

Other Parameters

Return type

HTTP request headers

Example

get-machine-account-subtype-approval-config-v1

Path Parameters

Other Parameters

Return type

HTTP request headers

Example

get-source-subtype-by-id-v1

Path Parameters

Other Parameters

Return type

HTTP request headers

Example

get-source-subtype-by-id-v2

Path Parameters

Other Parameters

Return type

HTTP request headers

Example

get-source-subtype-provisioning-policy-v2

Path Parameters

Other Parameters

Return type

HTTP request headers

Example

list-source-subtype-targets-v2

Path Parameters

Other Parameters

Return type

HTTP request headers

Example

list-source-subtypes-v1

Path Parameters

Other Parameters

Return type

HTTP request headers

Example

list-source-subtypes-v2

Path Parameters