Skip to main content

DataAccessSecurityAPI

Use this API to enable data ownership election campaigns, assign resource owners, and respond to identity lifecycle events to maintain continuous accountability. This API can also trigger and manage DAS tasks such as scans-starting them on demand, updating configurations or schedules, and retrieving statuses. Additionally, you can onboard and manage applications at scale by creating and configuring them, setting scanning schedules, retrieving metadata, and associating them with Virtual Appliances and Identity Collectors.

All URIs are relative to https://sailpoint.api.identitynow.com

MethodHTTP requestDescription
cancel-task-v1Post /das/v1/tasks/cancel/{id}Cancel a DAS task.
create-application-v1Post /das/v1/applicationsCreate application
create-data-dictionary-field-v1Post /das/v1/permissions/fieldsCreate data dictionary field
create-identity-collector-v1Post /das/v1/identity-collectorsCreate identity collector
create-schedule-v1Post /das/v1/tasks/schedulesCreate a new schedule.
das-v1-owners-assign-postPost /das/v1/owners/assignAssign owner to application resource.
das-v1-owners-owner-identity-id-resources-getGet /das/v1/owners/{ownerIdentityId}/resourcesList resources for owner.
das-v1-owners-reelect-postPost /das/v1/owners/reelectRe-elect resource owner.
das-v1-owners-resources-resource-id-getGet /das/v1/owners/resources/{resourceId}List owners for resource.
das-v1-owners-source-identity-id-reassign-destination-identity-id-postPost /das/v1/owners/{sourceIdentityId}/reassign/{destinationIdentityId}Reassign resource owner.
delete-application-v1Delete /das/v1/applications/{id}Delete an application by identifier.
delete-data-dictionary-field-v1Delete /das/v1/permissions/fields/{name}Delete data dictionary field
delete-identity-collector-v1Delete /das/v1/identity-collectors/{id}Delete identity collector by identifier
delete-schedule-v1Delete /das/v1/tasks/schedules/{id}Delete a DAS schedule.
delete-task-v1Delete /das/v1/tasks/{id}Delete a DAS task.
get-application-v1Get /das/v1/applications/{id}Retrieve application details by identifier.
get-applications-v1Get /das/v1/applicationsSearch applications in DAS.
get-identity-collector-builtin-properties-v1Get /das/v1/identity-collectors/propertiesList built-in identity collector properties
get-identity-collector-types-v1Get /das/v1/identity-collectors/typesList identity collector types
get-owners-v1Get /das/v1/owners/applications/{appId}Retrieve owners per application.
get-schedule-v1Get /das/v1/tasks/schedules/{id}Get a DAS schedule.
get-schedules-v1Get /das/v1/tasks/schedulesList all schedules.
get-task-v1Get /das/v1/tasks/{id}Get a DAS task.
get-tasks-v1Get /das/v1/tasksLists all DAS tasks.
list-data-dictionary-fields-v1Get /das/v1/permissions/fieldsList data dictionary fields
list-identity-collectors-v1Get /das/v1/identity-collectorsList identity collectors
put-application-v1Put /das/v1/applications/{id}Update application by identifier.
put-data-dictionary-field-v1Put /das/v1/permissions/fields/{name}Replace data dictionary field
put-identity-collector-v1Put /das/v1/identity-collectors/{id}Replace identity collector
put-schedule-v1Put /das/v1/tasks/schedules/{id}Update a schedule.
start-task-rerun-v1Post /das/v1/tasks/rerun/{id}Rerun a DAS task.

cancel-task-v1​

Cancel a DAS task. This end-point sends a request to cancel a task in Data Access Security.

API Spec

Path Parameters​

NameTypeDescriptionNotes
ctxcontext.Contextcontext for authentication, logging, cancellation, deadlines, tracing, etc.
idint64The unique identifier of the task to cancel.

Other Parameters​

Other parameters are passed through a pointer to a apiCancelTaskV1Request struct via the builder pattern

NameTypeDescriptionNotes

Return type​

(empty response body)

HTTP request headers​

  • Content-Type: Not defined
  • Accept: application/json

Example​

package main

import (
	"context"
	"fmt"
	"os"
  
    
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    id := 1001 // int64 | The unique identifier of the task to cancel. # int64 | The unique identifier of the task to cancel.

    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    r, err := apiClient.DataAccessSecurityAPI.CancelTaskV1(context.Background(), id).Execute()
	  //r, err := apiClient.DataAccessSecurityAPI.CancelTaskV1(context.Background(), id).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `DataAccessSecurityAPI.CancelTaskV1``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    
}

[Back to top]

create-application-v1​

Create application This endpoint creates a new application in Data Access Security with the specified configuration.

API Spec

Path Parameters​

Other Parameters​

Other parameters are passed through a pointer to a apiCreateApplicationV1Request struct via the builder pattern

NameTypeDescriptionNotes
baseCreateApplicationRequestBaseCreateApplicationRequestRequest body containing the details required to create a new application.

Return type​

(empty response body)

HTTP request headers​

  • Content-Type: application/json
  • Accept: application/json

Example​

package main

import (
	"context"
	"fmt"
	"os"
  "encoding/json"
    data_access_security "github.com/sailpoint-oss/golang-sdk/v3/data_access_security"
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    basecreateapplicationrequestJson := []byte(`{
          "adIdentityCollectorId" : 987654321,
          "applicationType" : 9,
          "nisIdentityCollectorId" : 192837465,
          "executeNow" : false,
          "name" : "HR File Server",
          "description" : "Stores HR documents and employee records.",
          "dataClassificationSettings" : {
            "isEnabled" : true,
            "clusterId" : "cluster-001"
          },
          "activityConfigurationSettings" : {
            "excludeFolders" : [ "/tmp", "/archive" ],
            "excludeFileExtensions" : [ ".log", ".bak" ],
            "excludeActions" : [ "delete", "move" ],
            "isEnabled" : true,
            "retentionTimePeriod" : 30,
            "retentionTimeType" : "days",
            "clusterId" : "cluster-001",
            "excludeUsers" : [ "user1", "user2" ]
          },
          "applicationCrawlerSettings" : {
            "calculateResourceSize" : 2,
            "excludedResources" : [ "resourceA", "resourceB" ],
            "crawlPublicFolders" : true,
            "excludedPathsByRegex" : "^/archive/.*",
            "isEnabled" : true,
            "crawlSnapshotsFolder" : true,
            "crawlMailboxes" : false,
            "crawlTopLevelShares" : [ "share1", "share2" ],
            "clusterId" : "cluster-001",
            "includeResources" : [ "resourceX", "resourceY" ]
          },
          "identityCollectorId" : 123456789,
          "permissionCollectorSettings" : {
            "analyzeUniquePermissions" : true,
            "calculateRiskiestPermissions" : false,
            "isEnabled" : true,
            "calculateEffectivePermissions" : true,
            "clusterId" : "cluster-001",
            "effectivePermissionsSource" : "S3"
          },
          "tags" : [ {
            "key" : 1,
            "value" : "Confidential"
          } ]
        }`) // BaseCreateApplicationRequest | Request body containing the details required to create a new application.

    var baseCreateApplicationRequest data_access_security.BaseCreateApplicationRequest
    if err := json.Unmarshal(basecreateapplicationrequestJson, &baseCreateApplicationRequest); err != nil {
      fmt.Println("Error:", err)
      return
    }
    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    r, err := apiClient.DataAccessSecurityAPI.CreateApplicationV1(context.Background()).BaseCreateApplicationRequest(baseCreateApplicationRequest).Execute()
	  //r, err := apiClient.DataAccessSecurityAPI.CreateApplicationV1(context.Background()).BaseCreateApplicationRequest(baseCreateApplicationRequest).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `DataAccessSecurityAPI.CreateApplicationV1``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    
}

[Back to top]

create-data-dictionary-field-v1​

Create data dictionary field Creates a custom data dictionary field. The server assigns fieldType String and required false; callers do not supply those values.

API Spec

Path Parameters​

Other Parameters​

Other parameters are passed through a pointer to a apiCreateDataDictionaryFieldV1Request struct via the builder pattern

NameTypeDescriptionNotes
createdatadictionaryfieldrequestCreatedatadictionaryfieldrequestCustom data dictionary field to create.

Return type​

Datadictionaryfieldlistitem

HTTP request headers​

  • Content-Type: application/json
  • Accept: application/json

Example​

package main

import (
	"context"
	"fmt"
	"os"
  "encoding/json"
    data_access_security "github.com/sailpoint-oss/golang-sdk/v3/data_access_security"
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    createdatadictionaryfieldrequestJson := []byte(`{
          "name" : "Department",
          "dataDictionaryType" : "Users"
        }`) // Createdatadictionaryfieldrequest | Custom data dictionary field to create.

    var createdatadictionaryfieldrequest data_access_security.Createdatadictionaryfieldrequest
    if err := json.Unmarshal(createdatadictionaryfieldrequestJson, &createdatadictionaryfieldrequest); err != nil {
      fmt.Println("Error:", err)
      return
    }
    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    resp, r, err := apiClient.DataAccessSecurityAPI.CreateDataDictionaryFieldV1(context.Background()).Createdatadictionaryfieldrequest(createdatadictionaryfieldrequest).Execute()
	  //resp, r, err := apiClient.DataAccessSecurityAPI.CreateDataDictionaryFieldV1(context.Background()).Createdatadictionaryfieldrequest(createdatadictionaryfieldrequest).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `DataAccessSecurityAPI.CreateDataDictionaryFieldV1``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    // response from `CreateDataDictionaryFieldV1`: Datadictionaryfieldlistitem
    fmt.Fprintf(os.Stdout, "Response from `DataAccessSecurityAPI.CreateDataDictionaryFieldV1`: %v\n", resp)
}

[Back to top]

create-identity-collector-v1​

Create identity collector This endpoint creates a new identity collector in Data Access Security for the specified source. The identity collector type is derived from the source.

Optionally configure users and groups to register source attributes (properties) and map them to data dictionary fields by name (fieldMappings.fieldDictionaryName). When omitted, both collections are created with fixed columns only.

API Spec

Path Parameters​

Other Parameters​

Other parameters are passed through a pointer to a apiCreateIdentityCollectorV1Request struct via the builder pattern

NameTypeDescriptionNotes
createidentitycollectorrequestCreateidentitycollectorrequestRequest body containing the details required to create a new identity collector.

Return type​

CreateIdentityCollectorV1200Response

HTTP request headers​

  • Content-Type: application/json
  • Accept: application/json

Example​

package main

import (
	"context"
	"fmt"
	"os"
  "encoding/json"
    data_access_security "github.com/sailpoint-oss/golang-sdk/v3/data_access_security"
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    createidentitycollectorrequestJson := []byte(`{
          "sourceId" : "2c9180835d2e5168015d32f890ca1581",
          "name" : "Active Directory Identity Collector",
          "groups" : {
            "fieldMappings" : [ {
              "sourceAttributeName" : "department",
              "fieldDictionaryName" : "UPTF-1"
            }, {
              "sourceAttributeName" : "department",
              "fieldDictionaryName" : "UPTF-1"
            } ],
            "properties" : [ "UserAddress", "department" ]
          },
          "users" : {
            "fieldMappings" : [ {
              "sourceAttributeName" : "department",
              "fieldDictionaryName" : "UPTF-1"
            }, {
              "sourceAttributeName" : "department",
              "fieldDictionaryName" : "UPTF-1"
            } ],
            "properties" : [ "UserAddress", "department" ]
          }
        }`) // Createidentitycollectorrequest | Request body containing the details required to create a new identity collector.

    var createidentitycollectorrequest data_access_security.Createidentitycollectorrequest
    if err := json.Unmarshal(createidentitycollectorrequestJson, &createidentitycollectorrequest); err != nil {
      fmt.Println("Error:", err)
      return
    }
    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    resp, r, err := apiClient.DataAccessSecurityAPI.CreateIdentityCollectorV1(context.Background()).Createidentitycollectorrequest(createidentitycollectorrequest).Execute()
	  //resp, r, err := apiClient.DataAccessSecurityAPI.CreateIdentityCollectorV1(context.Background()).Createidentitycollectorrequest(createidentitycollectorrequest).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `DataAccessSecurityAPI.CreateIdentityCollectorV1``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    // response from `CreateIdentityCollectorV1`: CreateIdentityCollectorV1200Response
    fmt.Fprintf(os.Stdout, "Response from `DataAccessSecurityAPI.CreateIdentityCollectorV1`: %v\n", resp)
}

[Back to top]

create-schedule-v1​

Create a new schedule.

API Spec

Path Parameters​

Other Parameters​

Other parameters are passed through a pointer to a apiCreateScheduleV1Request struct via the builder pattern

NameTypeDescriptionNotes
createScheduleRequestCreateScheduleRequest

Return type​

int64

HTTP request headers​

  • Content-Type: application/json
  • Accept: application/json

Example​

package main

import (
	"context"
	"fmt"
	"os"
  "encoding/json"
    data_access_security "github.com/sailpoint-oss/golang-sdk/v3/data_access_security"
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    createschedulerequestJson := []byte(`{
          "scheduleTaskName" : "Daily Data Sync",
          "scheduleType" : "Daily",
          "active" : true,
          "interval" : 1440,
          "startTime" : 1762237200,
          "endTime" : 1762240800,
          "taskTypeName" : "DataSync",
          "daysOfWeek" : [ "Monday", "Wednesday", "Friday" ],
          "applicationId" : 2001,
          "runAfterScheduleTaskId" : 1000
        }`) // CreateScheduleRequest | 

    var createScheduleRequest data_access_security.CreateScheduleRequest
    if err := json.Unmarshal(createschedulerequestJson, &createScheduleRequest); err != nil {
      fmt.Println("Error:", err)
      return
    }
    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    resp, r, err := apiClient.DataAccessSecurityAPI.CreateScheduleV1(context.Background()).CreateScheduleRequest(createScheduleRequest).Execute()
	  //resp, r, err := apiClient.DataAccessSecurityAPI.CreateScheduleV1(context.Background()).CreateScheduleRequest(createScheduleRequest).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `DataAccessSecurityAPI.CreateScheduleV1``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    // response from `CreateScheduleV1`: int64
    fmt.Fprintf(os.Stdout, "Response from `DataAccessSecurityAPI.CreateScheduleV1`: %v\n", resp)
}

[Back to top]

das-v1-owners-assign-post​

Assign owner to application resource.

API Spec

Path Parameters​

Other Parameters​

Other parameters are passed through a pointer to a apiDasV1OwnersAssignPostRequest struct via the builder pattern

NameTypeDescriptionNotes
assignResourceOwnerRequestAssignResourceOwnerRequestThe request body must contain the application ID, resource path, and identity ID to be assigned as the resource owner.

Return type​

int32

HTTP request headers​

  • Content-Type: application/json
  • Accept: application/json

Example​

package main

import (
	"context"
	"fmt"
	"os"
  "encoding/json"
    data_access_security "github.com/sailpoint-oss/golang-sdk/v3/data_access_security"
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    assignresourceownerrequestJson := []byte(`{
          "fullPath" : "/shared/hr/documents/employee-records.pdf",
          "identityId" : "d290f1ee-6c54-4b01-90e6-d701748f0851",
          "appId" : 12345
        }`) // AssignResourceOwnerRequest | The request body must contain the application ID, resource path, and identity ID to be assigned as the resource owner.

    var assignResourceOwnerRequest data_access_security.AssignResourceOwnerRequest
    if err := json.Unmarshal(assignresourceownerrequestJson, &assignResourceOwnerRequest); err != nil {
      fmt.Println("Error:", err)
      return
    }
    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    resp, r, err := apiClient.DataAccessSecurityAPI.DasV1OwnersAssignPost(context.Background()).AssignResourceOwnerRequest(assignResourceOwnerRequest).Execute()
	  //resp, r, err := apiClient.DataAccessSecurityAPI.DasV1OwnersAssignPost(context.Background()).AssignResourceOwnerRequest(assignResourceOwnerRequest).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `DataAccessSecurityAPI.DasV1OwnersAssignPost``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    // response from `DasV1OwnersAssignPost`: int32
    fmt.Fprintf(os.Stdout, "Response from `DataAccessSecurityAPI.DasV1OwnersAssignPost`: %v\n", resp)
}

[Back to top]

das-v1-owners-owner-identity-id-resources-get​

List resources for owner.

API Spec

Path Parameters​

NameTypeDescriptionNotes
ctxcontext.Contextcontext for authentication, logging, cancellation, deadlines, tracing, etc.
ownerIdentityIdstringUnique identifier for the owner. This should be a UUID representing the owner's identity.

Other Parameters​

Other parameters are passed through a pointer to a apiDasV1OwnersOwnerIdentityIdResourcesGetRequest struct via the builder pattern

NameTypeDescriptionNotes

limit | int32 | Not applicable for this endpoint. Do not use. | [default to 250] offset | int32 | Not applicable for this endpoint. Do not use. | [default to 0]

Return type​

[]ResourceModel

HTTP request headers​

  • Content-Type: Not defined
  • Accept: application/json

Example​

package main

import (
	"context"
	"fmt"
	"os"
  
    
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    ownerIdentityId := `a3f1c2d4-5678-4e9b-8c2d-123456789abc` // string | Unique identifier for the owner. This should be a UUID representing the owner's identity. # string | Unique identifier for the owner. This should be a UUID representing the owner's identity.
    limit := 250 // int32 | Not applicable for this endpoint. Do not use. (optional) (default to 250) # int32 | Not applicable for this endpoint. Do not use. (optional) (default to 250)
    offset := 0 // int32 | Not applicable for this endpoint. Do not use. (optional) (default to 0) # int32 | Not applicable for this endpoint. Do not use. (optional) (default to 0)

    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    resp, r, err := apiClient.DataAccessSecurityAPI.DasV1OwnersOwnerIdentityIdResourcesGet(context.Background(), ownerIdentityId).Execute()
	  //resp, r, err := apiClient.DataAccessSecurityAPI.DasV1OwnersOwnerIdentityIdResourcesGet(context.Background(), ownerIdentityId).Limit(limit).Offset(offset).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `DataAccessSecurityAPI.DasV1OwnersOwnerIdentityIdResourcesGet``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    // response from `DasV1OwnersOwnerIdentityIdResourcesGet`: []ResourceModel
    fmt.Fprintf(os.Stdout, "Response from `DataAccessSecurityAPI.DasV1OwnersOwnerIdentityIdResourcesGet`: %v\n", resp)
}

[Back to top]

das-v1-owners-reelect-post​

Re-elect resource owner.

API Spec

Path Parameters​

Other Parameters​

Other parameters are passed through a pointer to a apiDasV1OwnersReelectPostRequest struct via the builder pattern

NameTypeDescriptionNotes
reelectRequestReelectRequestThe request body must contain details for re-electing a resource owner. Date/time fields should use epoch format in seconds.

Return type​

int32

HTTP request headers​

  • Content-Type: application/json
  • Accept: application/json

Example​

package main

import (
	"context"
	"fmt"
	"os"
  "encoding/json"
    data_access_security "github.com/sailpoint-oss/golang-sdk/v3/data_access_security"
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    reelectrequestJson := []byte(`{
          "ownerId" : "c1a2b3d4-e5f6-7890-abcd-1234567890ab",
          "campaignName" : "Annual Resource Owner Election",
          "reviewers" : [ "d4e5f6a7-b8c9-0123-4567-89abcdef0123", "e7f8g9h0-i1j2-3456-7890-klmnopqrstuv" ]
        }`) // ReelectRequest | The request body must contain details for re-electing a resource owner. Date/time fields should use epoch format in seconds.

    var reelectRequest data_access_security.ReelectRequest
    if err := json.Unmarshal(reelectrequestJson, &reelectRequest); err != nil {
      fmt.Println("Error:", err)
      return
    }
    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    resp, r, err := apiClient.DataAccessSecurityAPI.DasV1OwnersReelectPost(context.Background()).ReelectRequest(reelectRequest).Execute()
	  //resp, r, err := apiClient.DataAccessSecurityAPI.DasV1OwnersReelectPost(context.Background()).ReelectRequest(reelectRequest).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `DataAccessSecurityAPI.DasV1OwnersReelectPost``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    // response from `DasV1OwnersReelectPost`: int32
    fmt.Fprintf(os.Stdout, "Response from `DataAccessSecurityAPI.DasV1OwnersReelectPost`: %v\n", resp)
}

[Back to top]

das-v1-owners-resources-resource-id-get​

List owners for resource.

API Spec

Path Parameters​

NameTypeDescriptionNotes
ctxcontext.Contextcontext for authentication, logging, cancellation, deadlines, tracing, etc.
resourceIdint64Unique identifier for the resource.

Other Parameters​

Other parameters are passed through a pointer to a apiDasV1OwnersResourcesResourceIdGetRequest struct via the builder pattern

NameTypeDescriptionNotes

limit | int32 | Not applicable for this endpoint. Do not use. | [default to 250] offset | int32 | Not applicable for this endpoint. Do not use. | [default to 0]

Return type​

[]string

HTTP request headers​

  • Content-Type: Not defined
  • Accept: application/json

Example​

package main

import (
	"context"
	"fmt"
	"os"
  
    
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    resourceId := 101 // int64 | Unique identifier for the resource. # int64 | Unique identifier for the resource.
    limit := 250 // int32 | Not applicable for this endpoint. Do not use. (optional) (default to 250) # int32 | Not applicable for this endpoint. Do not use. (optional) (default to 250)
    offset := 0 // int32 | Not applicable for this endpoint. Do not use. (optional) (default to 0) # int32 | Not applicable for this endpoint. Do not use. (optional) (default to 0)

    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    resp, r, err := apiClient.DataAccessSecurityAPI.DasV1OwnersResourcesResourceIdGet(context.Background(), resourceId).Execute()
	  //resp, r, err := apiClient.DataAccessSecurityAPI.DasV1OwnersResourcesResourceIdGet(context.Background(), resourceId).Limit(limit).Offset(offset).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `DataAccessSecurityAPI.DasV1OwnersResourcesResourceIdGet``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    // response from `DasV1OwnersResourcesResourceIdGet`: []string
    fmt.Fprintf(os.Stdout, "Response from `DataAccessSecurityAPI.DasV1OwnersResourcesResourceIdGet`: %v\n", resp)
}

[Back to top]

das-v1-owners-source-identity-id-reassign-destination-identity-id-post​

Reassign resource owner.

API Spec

Path Parameters​

NameTypeDescriptionNotes
ctxcontext.Contextcontext for authentication, logging, cancellation, deadlines, tracing, etc.
sourceIdentityIdstringUnique identifier for the source owner. This should be a UUID representing the identity to reassign from.
destinationIdentityIdstringUnique identifier for the destination owner. This should be a UUID representing the identity to reassign to.

Other Parameters​

Other parameters are passed through a pointer to a apiDasV1OwnersSourceIdentityIdReassignDestinationIdentityIdPostRequest struct via the builder pattern

NameTypeDescriptionNotes

Return type​

int32

HTTP request headers​

  • Content-Type: Not defined
  • Accept: application/json

Example​

package main

import (
	"context"
	"fmt"
	"os"
  
    
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    sourceIdentityId := `a3f1c2d4-5678-4e9b-8c2d-123456789abc` // string | Unique identifier for the source owner. This should be a UUID representing the identity to reassign from. # string | Unique identifier for the source owner. This should be a UUID representing the identity to reassign from.
    destinationIdentityId := `b4e2d3c5-6789-4f0a-9d3e-234567890bcd` // string | Unique identifier for the destination owner. This should be a UUID representing the identity to reassign to. # string | Unique identifier for the destination owner. This should be a UUID representing the identity to reassign to.

    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    resp, r, err := apiClient.DataAccessSecurityAPI.DasV1OwnersSourceIdentityIdReassignDestinationIdentityIdPost(context.Background(), sourceIdentityId, destinationIdentityId).Execute()
	  //resp, r, err := apiClient.DataAccessSecurityAPI.DasV1OwnersSourceIdentityIdReassignDestinationIdentityIdPost(context.Background(), sourceIdentityId, destinationIdentityId).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `DataAccessSecurityAPI.DasV1OwnersSourceIdentityIdReassignDestinationIdentityIdPost``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    // response from `DasV1OwnersSourceIdentityIdReassignDestinationIdentityIdPost`: int32
    fmt.Fprintf(os.Stdout, "Response from `DataAccessSecurityAPI.DasV1OwnersSourceIdentityIdReassignDestinationIdentityIdPost`: %v\n", resp)
}

[Back to top]

delete-application-v1​

Delete an application by identifier. This endpoint deletes an application from Data Access Security by its unique identifier.

API Spec

Path Parameters​

NameTypeDescriptionNotes
ctxcontext.Contextcontext for authentication, logging, cancellation, deadlines, tracing, etc.
idint64The unique identifier of the application to delete.

Other Parameters​

Other parameters are passed through a pointer to a apiDeleteApplicationV1Request struct via the builder pattern

NameTypeDescriptionNotes

Return type​

(empty response body)

HTTP request headers​

  • Content-Type: Not defined
  • Accept: application/json

Example​

package main

import (
	"context"
	"fmt"
	"os"
  
    
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    id := 12345 // int64 | The unique identifier of the application to delete. # int64 | The unique identifier of the application to delete.

    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    r, err := apiClient.DataAccessSecurityAPI.DeleteApplicationV1(context.Background(), id).Execute()
	  //r, err := apiClient.DataAccessSecurityAPI.DeleteApplicationV1(context.Background(), id).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `DataAccessSecurityAPI.DeleteApplicationV1``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    
}

[Back to top]

delete-data-dictionary-field-v1​

Delete data dictionary field Deletes a custom data dictionary field. Built-in fields where required is true cannot be deleted.

API Spec

Path Parameters​

NameTypeDescriptionNotes
ctxcontext.Contextcontext for authentication, logging, cancellation, deadlines, tracing, etc.
namestringThe field name to delete.

Other Parameters​

Other parameters are passed through a pointer to a apiDeleteDataDictionaryFieldV1Request struct via the builder pattern

NameTypeDescriptionNotes

Return type​

(empty response body)

HTTP request headers​

  • Content-Type: Not defined
  • Accept: application/json

Example​

package main

import (
	"context"
	"fmt"
	"os"
  
    
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    name := `Department` // string | The field name to delete. # string | The field name to delete.

    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    r, err := apiClient.DataAccessSecurityAPI.DeleteDataDictionaryFieldV1(context.Background(), name).Execute()
	  //r, err := apiClient.DataAccessSecurityAPI.DeleteDataDictionaryFieldV1(context.Background(), name).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `DataAccessSecurityAPI.DeleteDataDictionaryFieldV1``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    
}

[Back to top]

delete-identity-collector-v1​

Delete identity collector by identifier This endpoint deletes an identity collector from Data Access Security by its unique identifier.

API Spec

Path Parameters​

NameTypeDescriptionNotes
ctxcontext.Contextcontext for authentication, logging, cancellation, deadlines, tracing, etc.
idint64The unique identifier of the identity collector to delete.

Other Parameters​

Other parameters are passed through a pointer to a apiDeleteIdentityCollectorV1Request struct via the builder pattern

NameTypeDescriptionNotes

Return type​

(empty response body)

HTTP request headers​

  • Content-Type: Not defined
  • Accept: application/json

Example​

package main

import (
	"context"
	"fmt"
	"os"
  
    
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    id := 12345 // int64 | The unique identifier of the identity collector to delete. # int64 | The unique identifier of the identity collector to delete.

    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    r, err := apiClient.DataAccessSecurityAPI.DeleteIdentityCollectorV1(context.Background(), id).Execute()
	  //r, err := apiClient.DataAccessSecurityAPI.DeleteIdentityCollectorV1(context.Background(), id).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `DataAccessSecurityAPI.DeleteIdentityCollectorV1``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    
}

[Back to top]

delete-schedule-v1​

Delete a DAS schedule. This end-point sends a request to delete a schedule in Data Access Security.

API Spec

Path Parameters​

NameTypeDescriptionNotes
ctxcontext.Contextcontext for authentication, logging, cancellation, deadlines, tracing, etc.
idint64The unique identifier of the schedule to delete.

Other Parameters​

Other parameters are passed through a pointer to a apiDeleteScheduleV1Request struct via the builder pattern

NameTypeDescriptionNotes

Return type​

(empty response body)

HTTP request headers​

  • Content-Type: Not defined
  • Accept: application/json

Example​

package main

import (
	"context"
	"fmt"
	"os"
  
    
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    id := 1001 // int64 | The unique identifier of the schedule to delete. # int64 | The unique identifier of the schedule to delete.

    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    r, err := apiClient.DataAccessSecurityAPI.DeleteScheduleV1(context.Background(), id).Execute()
	  //r, err := apiClient.DataAccessSecurityAPI.DeleteScheduleV1(context.Background(), id).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `DataAccessSecurityAPI.DeleteScheduleV1``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    
}

[Back to top]

delete-task-v1​

Delete a DAS task. This end-point sends a request to delete a task in Data Access Security.

API Spec

Path Parameters​

NameTypeDescriptionNotes
ctxcontext.Contextcontext for authentication, logging, cancellation, deadlines, tracing, etc.
idint64The unique identifier of the task to delete.

Other Parameters​

Other parameters are passed through a pointer to a apiDeleteTaskV1Request struct via the builder pattern

NameTypeDescriptionNotes

Return type​

(empty response body)

HTTP request headers​

  • Content-Type: Not defined
  • Accept: application/json

Example​

package main

import (
	"context"
	"fmt"
	"os"
  
    
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    id := 1001 // int64 | The unique identifier of the task to delete. # int64 | The unique identifier of the task to delete.

    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    r, err := apiClient.DataAccessSecurityAPI.DeleteTaskV1(context.Background(), id).Execute()
	  //r, err := apiClient.DataAccessSecurityAPI.DeleteTaskV1(context.Background(), id).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `DataAccessSecurityAPI.DeleteTaskV1``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    
}

[Back to top]

get-application-v1​

Retrieve application details by identifier. This endpoint retrieves the details of a specific application in Data Access Security by its unique identifier.

API Spec

Path Parameters​

NameTypeDescriptionNotes
ctxcontext.Contextcontext for authentication, logging, cancellation, deadlines, tracing, etc.
idint64The unique identifier of the application to retrieve.

Other Parameters​

Other parameters are passed through a pointer to a apiGetApplicationV1Request struct via the builder pattern

NameTypeDescriptionNotes

Return type​

ApplicationItem

HTTP request headers​

  • Content-Type: Not defined
  • Accept: application/json

Example​

package main

import (
	"context"
	"fmt"
	"os"
  
    
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    id := 12345 // int64 | The unique identifier of the application to retrieve. # int64 | The unique identifier of the application to retrieve.

    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    resp, r, err := apiClient.DataAccessSecurityAPI.GetApplicationV1(context.Background(), id).Execute()
	  //resp, r, err := apiClient.DataAccessSecurityAPI.GetApplicationV1(context.Background(), id).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `DataAccessSecurityAPI.GetApplicationV1``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    // response from `GetApplicationV1`: ApplicationItem
    fmt.Fprintf(os.Stdout, "Response from `DataAccessSecurityAPI.GetApplicationV1`: %v\n", resp)
}

[Back to top]

get-applications-v1​

Search applications in DAS. This endpoint lists all the applications in Data Access Security with optional filtering.

API Spec

Path Parameters​

Other Parameters​

Other parameters are passed through a pointer to a apiGetApplicationsV1Request struct via the builder pattern

NameTypeDescriptionNotes
filtersstringFilter results using the standard syntax described in V3 API Standard Collection Parameters Filtering is supported for the following fields and operators: appIds: eq, in tagIds: eq, in statuses: eq, in groupCodes: eq, in virtualAppId: eq appName: eq supportsValidation: eq Supported composite operators are and, or
limitint32Max number of results to return. See V3 API Standard Collection Parameters for more information.[default to 250]
offsetint32Offset into the full result set. Usually specified with limit to paginate through the results. See V3 API Standard Collection Parameters for more information.[default to 0]
countboolIf true it will populate the X-Total-Count response header with the number of results that would be returned if limit and offset were ignored. Since requesting a total count can have a performance impact, it is recommended not to send count=true if that value will not be used. See V3 API Standard Collection Parameters for more information.[default to false]

Return type​

[]ApplicationItem

HTTP request headers​

  • Content-Type: Not defined
  • Accept: application/json

Example​

package main

import (
	"context"
	"fmt"
	"os"
  
    
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    filters := `AppType eq 'ActiveDirectory' and Statuses eq 'Passed'` // string | Filter results using the standard syntax described in [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters#filtering-results)  Filtering is supported for the following fields and operators:  **appIds**: *eq, in*  **tagIds**: *eq, in*  **statuses**: *eq, in*  **groupCodes**: *eq, in*  **virtualAppId**: *eq*  **appName**: *eq*  **supportsValidation**: *eq*  Supported composite operators are *and, or* (optional) # string | Filter results using the standard syntax described in [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters#filtering-results)  Filtering is supported for the following fields and operators:  **appIds**: *eq, in*  **tagIds**: *eq, in*  **statuses**: *eq, in*  **groupCodes**: *eq, in*  **virtualAppId**: *eq*  **appName**: *eq*  **supportsValidation**: *eq*  Supported composite operators are *and, or* (optional)
    limit := 250 // int32 | Max number of results to return. See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information. (optional) (default to 250) # int32 | Max number of results to return. See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information. (optional) (default to 250)
    offset := 0 // int32 | Offset into the full result set. Usually specified with *limit* to paginate through the results. See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information. (optional) (default to 0) # int32 | Offset into the full result set. Usually specified with *limit* to paginate through the results. See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information. (optional) (default to 0)
    count := true // bool | If *true* it will populate the *X-Total-Count* response header with the number of results that would be returned if *limit* and *offset* were ignored.  Since requesting a total count can have a performance impact, it is recommended not to send **count=true** if that value will not be used.  See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information. (optional) (default to false) # bool | If *true* it will populate the *X-Total-Count* response header with the number of results that would be returned if *limit* and *offset* were ignored.  Since requesting a total count can have a performance impact, it is recommended not to send **count=true** if that value will not be used.  See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information. (optional) (default to false)

    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    resp, r, err := apiClient.DataAccessSecurityAPI.GetApplicationsV1(context.Background()).Execute()
	  //resp, r, err := apiClient.DataAccessSecurityAPI.GetApplicationsV1(context.Background()).Filters(filters).Limit(limit).Offset(offset).Count(count).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `DataAccessSecurityAPI.GetApplicationsV1``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    // response from `GetApplicationsV1`: []ApplicationItem
    fmt.Fprintf(os.Stdout, "Response from `DataAccessSecurityAPI.GetApplicationsV1`: %v\n", resp)
}

[Back to top]

get-identity-collector-builtin-properties-v1​

List built-in identity collector properties Returns the built-in source attribute names for users and groups collections. When no filter is provided, built-in properties for all public identity collector types are returned (the same base types listed by List Identity Collector Types). When filtered by type, only the matching type is returned; the filter accepts any supported type display name, including SaaS variants such as Box SaaS or AWS SaaS.

These attributes are always available for field mapping without being listed in properties.

API Spec

Path Parameters​

Other Parameters​

Other parameters are passed through a pointer to a apiGetIdentityCollectorBuiltinPropertiesV1Request struct via the builder pattern

NameTypeDescriptionNotes
filtersstringFilter results using the standard syntax described in V3 API Standard Collection Parameters Filtering is supported for the following fields and operators: type: eq

Return type​

Identitycollectorbuiltinpropertiesresponse

HTTP request headers​

  • Content-Type: Not defined
  • Accept: application/json

Example​

package main

import (
	"context"
	"fmt"
	"os"
  
    
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    filters := `type eq "Azure Active Directory"` // string | Filter results using the standard syntax described in [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters#filtering-results)  Filtering is supported for the following fields and operators:  **type**: *eq* (optional) # string | Filter results using the standard syntax described in [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters#filtering-results)  Filtering is supported for the following fields and operators:  **type**: *eq* (optional)

    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    resp, r, err := apiClient.DataAccessSecurityAPI.GetIdentityCollectorBuiltinPropertiesV1(context.Background()).Execute()
	  //resp, r, err := apiClient.DataAccessSecurityAPI.GetIdentityCollectorBuiltinPropertiesV1(context.Background()).Filters(filters).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `DataAccessSecurityAPI.GetIdentityCollectorBuiltinPropertiesV1``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    // response from `GetIdentityCollectorBuiltinPropertiesV1`: Identitycollectorbuiltinpropertiesresponse
    fmt.Fprintf(os.Stdout, "Response from `DataAccessSecurityAPI.GetIdentityCollectorBuiltinPropertiesV1`: %v\n", resp)
}

[Back to top]

get-identity-collector-types-v1​

List identity collector types Returns the public identity collector type display names exposed for metadata and UI discovery. This endpoint lists base types only (for example, Box rather than Box SaaS). SaaS variants are not listed here; the identity collector type is derived from sourceId when creating an identity collector. Existing identity collectors may still report SaaS variant types in list and update responses.

Pagination is not supported for this endpoint; the full set of public types is always returned.

API Spec

Path Parameters​

Other Parameters​

Other parameters are passed through a pointer to a apiGetIdentityCollectorTypesV1Request struct via the builder pattern

NameTypeDescriptionNotes
limitint32Max number of results to return. See V3 API Standard Collection Parameters for more information.[default to 250]
offsetint32Offset into the full result set. Usually specified with limit to paginate through the results. See V3 API Standard Collection Parameters for more information.[default to 0]

Return type​

[]string

HTTP request headers​

  • Content-Type: Not defined
  • Accept: application/json

Example​

package main

import (
	"context"
	"fmt"
	"os"
  
    
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    limit := 250 // int32 | Max number of results to return. See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information. (optional) (default to 250) # int32 | Max number of results to return. See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information. (optional) (default to 250)
    offset := 0 // int32 | Offset into the full result set. Usually specified with *limit* to paginate through the results. See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information. (optional) (default to 0) # int32 | Offset into the full result set. Usually specified with *limit* to paginate through the results. See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information. (optional) (default to 0)

    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    resp, r, err := apiClient.DataAccessSecurityAPI.GetIdentityCollectorTypesV1(context.Background()).Execute()
	  //resp, r, err := apiClient.DataAccessSecurityAPI.GetIdentityCollectorTypesV1(context.Background()).Limit(limit).Offset(offset).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `DataAccessSecurityAPI.GetIdentityCollectorTypesV1``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    // response from `GetIdentityCollectorTypesV1`: []string
    fmt.Fprintf(os.Stdout, "Response from `DataAccessSecurityAPI.GetIdentityCollectorTypesV1`: %v\n", resp)
}

[Back to top]

get-owners-v1​

Retrieve owners per application.

API Spec

Path Parameters​

NameTypeDescriptionNotes
ctxcontext.Contextcontext for authentication, logging, cancellation, deadlines, tracing, etc.
appIdint64The unique identifier of the application for which to retrieve owners.

Other Parameters​

Other parameters are passed through a pointer to a apiGetOwnersV1Request struct via the builder pattern

NameTypeDescriptionNotes

limit | int32 | Not applicable for this endpoint. Do not use. | [default to 250] offset | int32 | Not applicable for this endpoint. Do not use. | [default to 0]

Return type​

[]DataOwnerModel

HTTP request headers​

  • Content-Type: Not defined
  • Accept: application/json

Example​

package main

import (
	"context"
	"fmt"
	"os"
  
    
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    appId := 2001 // int64 | The unique identifier of the application for which to retrieve owners. # int64 | The unique identifier of the application for which to retrieve owners.
    limit := 250 // int32 | Not applicable for this endpoint. Do not use. (optional) (default to 250) # int32 | Not applicable for this endpoint. Do not use. (optional) (default to 250)
    offset := 0 // int32 | Not applicable for this endpoint. Do not use. (optional) (default to 0) # int32 | Not applicable for this endpoint. Do not use. (optional) (default to 0)

    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    resp, r, err := apiClient.DataAccessSecurityAPI.GetOwnersV1(context.Background(), appId).Execute()
	  //resp, r, err := apiClient.DataAccessSecurityAPI.GetOwnersV1(context.Background(), appId).Limit(limit).Offset(offset).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `DataAccessSecurityAPI.GetOwnersV1``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    // response from `GetOwnersV1`: []DataOwnerModel
    fmt.Fprintf(os.Stdout, "Response from `DataAccessSecurityAPI.GetOwnersV1`: %v\n", resp)
}

[Back to top]

get-schedule-v1​

Get a DAS schedule. This end-point gets a schedule in Data Access Security.

API Spec

Path Parameters​

NameTypeDescriptionNotes
ctxcontext.Contextcontext for authentication, logging, cancellation, deadlines, tracing, etc.
idint64The unique identifier of the schedule to retrieve.

Other Parameters​

Other parameters are passed through a pointer to a apiGetScheduleV1Request struct via the builder pattern

NameTypeDescriptionNotes

Return type​

ScheduleInfo

HTTP request headers​

  • Content-Type: Not defined
  • Accept: application/json

Example​

package main

import (
	"context"
	"fmt"
	"os"
  
    
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    id := 1001 // int64 | The unique identifier of the schedule to retrieve. # int64 | The unique identifier of the schedule to retrieve.

    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    resp, r, err := apiClient.DataAccessSecurityAPI.GetScheduleV1(context.Background(), id).Execute()
	  //resp, r, err := apiClient.DataAccessSecurityAPI.GetScheduleV1(context.Background(), id).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `DataAccessSecurityAPI.GetScheduleV1``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    // response from `GetScheduleV1`: ScheduleInfo
    fmt.Fprintf(os.Stdout, "Response from `DataAccessSecurityAPI.GetScheduleV1`: %v\n", resp)
}

[Back to top]

get-schedules-v1​

List all schedules. This end-point lists all the schedules in Data Access Security.

API Spec

Path Parameters​

Other Parameters​

Other parameters are passed through a pointer to a apiGetSchedulesV1Request struct via the builder pattern

NameTypeDescriptionNotes
filtersstringFilter results using the standard syntax described in V3 API Standard Collection Parameters Filtering is supported for the following fields and operators: scheduleTaskIds: eq, in taskTypeName: eq, in status: eq applicationId: eq fullName: eq nameSubString: eq scheduleType: eq Supported composite operators are and, or
limitint32Max number of results to return. See V3 API Standard Collection Parameters for more information.[default to 250]
offsetint32Offset into the full result set. Usually specified with limit to paginate through the results. See V3 API Standard Collection Parameters for more information.[default to 0]
countboolIf true it will populate the X-Total-Count response header with the number of results that would be returned if limit and offset were ignored. Since requesting a total count can have a performance impact, it is recommended not to send count=true if that value will not be used. See V3 API Standard Collection Parameters for more information.[default to false]

Return type​

[]ScheduleInfo

HTTP request headers​

  • Content-Type: Not defined
  • Accept: application/json

Example​

package main

import (
	"context"
	"fmt"
	"os"
  
    
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    filters := `ScheduleType eq "Daily" and startTime eq 1762237200` // string | Filter results using the standard syntax described in [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters#filtering-results)  Filtering is supported for the following fields and operators:  **scheduleTaskIds**: *eq, in*  **taskTypeName**: *eq, in*  **status**: *eq*  **applicationId**: *eq*  **fullName**: *eq*  **nameSubString**: *eq*  **scheduleType**: *eq*  Supported composite operators are *and, or* (optional) # string | Filter results using the standard syntax described in [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters#filtering-results)  Filtering is supported for the following fields and operators:  **scheduleTaskIds**: *eq, in*  **taskTypeName**: *eq, in*  **status**: *eq*  **applicationId**: *eq*  **fullName**: *eq*  **nameSubString**: *eq*  **scheduleType**: *eq*  Supported composite operators are *and, or* (optional)
    limit := 250 // int32 | Max number of results to return. See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information. (optional) (default to 250) # int32 | Max number of results to return. See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information. (optional) (default to 250)
    offset := 0 // int32 | Offset into the full result set. Usually specified with *limit* to paginate through the results. See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information. (optional) (default to 0) # int32 | Offset into the full result set. Usually specified with *limit* to paginate through the results. See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information. (optional) (default to 0)
    count := true // bool | If *true* it will populate the *X-Total-Count* response header with the number of results that would be returned if *limit* and *offset* were ignored.  Since requesting a total count can have a performance impact, it is recommended not to send **count=true** if that value will not be used.  See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information. (optional) (default to false) # bool | If *true* it will populate the *X-Total-Count* response header with the number of results that would be returned if *limit* and *offset* were ignored.  Since requesting a total count can have a performance impact, it is recommended not to send **count=true** if that value will not be used.  See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information. (optional) (default to false)

    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    resp, r, err := apiClient.DataAccessSecurityAPI.GetSchedulesV1(context.Background()).Execute()
	  //resp, r, err := apiClient.DataAccessSecurityAPI.GetSchedulesV1(context.Background()).Filters(filters).Limit(limit).Offset(offset).Count(count).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `DataAccessSecurityAPI.GetSchedulesV1``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    // response from `GetSchedulesV1`: []ScheduleInfo
    fmt.Fprintf(os.Stdout, "Response from `DataAccessSecurityAPI.GetSchedulesV1`: %v\n", resp)
}

[Back to top]

get-task-v1​

Get a DAS task. This end-point gets a task in Data Access Security.

API Spec

Path Parameters​

NameTypeDescriptionNotes
ctxcontext.Contextcontext for authentication, logging, cancellation, deadlines, tracing, etc.
idint64The unique identifier of the task to retrieve.

Other Parameters​

Other parameters are passed through a pointer to a apiGetTaskV1Request struct via the builder pattern

NameTypeDescriptionNotes

Return type​

TaskInfo

HTTP request headers​

  • Content-Type: Not defined
  • Accept: application/json

Example​

package main

import (
	"context"
	"fmt"
	"os"
  
    
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    id := 1001 // int64 | The unique identifier of the task to retrieve. # int64 | The unique identifier of the task to retrieve.

    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    resp, r, err := apiClient.DataAccessSecurityAPI.GetTaskV1(context.Background(), id).Execute()
	  //resp, r, err := apiClient.DataAccessSecurityAPI.GetTaskV1(context.Background(), id).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `DataAccessSecurityAPI.GetTaskV1``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    // response from `GetTaskV1`: TaskInfo
    fmt.Fprintf(os.Stdout, "Response from `DataAccessSecurityAPI.GetTaskV1`: %v\n", resp)
}

[Back to top]

get-tasks-v1​

Lists all DAS tasks. This end-point lists all the tasks in Data Access Security.

API Spec

Path Parameters​

Other Parameters​

Other parameters are passed through a pointer to a apiGetTasksV1Request struct via the builder pattern

NameTypeDescriptionNotes
filtersstringFilter results using the standard syntax described in V3 API Standard Collection Parameters Filtering is supported for the following fields and operators: taskIds: eq, in statuses: eq, in taskTypeName: eq, in taskName: eq endBeforeTime: eq Supported composite operators are and, or Example: taskTypeName eq "DataSync" and endBeforeTime eq 1762240800
limitint32Max number of results to return. See V3 API Standard Collection Parameters for more information.[default to 250]
offsetint32Offset into the full result set. Usually specified with limit to paginate through the results. See V3 API Standard Collection Parameters for more information.[default to 0]
countboolIf true it will populate the X-Total-Count response header with the number of results that would be returned if limit and offset were ignored. Since requesting a total count can have a performance impact, it is recommended not to send count=true if that value will not be used. See V3 API Standard Collection Parameters for more information.[default to false]

Return type​

[]TaskInfo

HTTP request headers​

  • Content-Type: Not defined
  • Accept: application/json

Example​

package main

import (
	"context"
	"fmt"
	"os"
  
    
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    filters := `TaskTypeName eq "DataClassification and EndBeforeTime eq 1762240800` // string | Filter results using the standard syntax described in [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters#filtering-results)  Filtering is supported for the following fields and operators:  **taskIds**: *eq, in*  **statuses**: *eq, in*  **taskTypeName**: *eq, in*  **taskName**: *eq*  **endBeforeTime**: *eq*  Supported composite operators are *and, or*  Example: taskTypeName eq \"DataSync\" and endBeforeTime eq 1762240800 (optional) # string | Filter results using the standard syntax described in [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters#filtering-results)  Filtering is supported for the following fields and operators:  **taskIds**: *eq, in*  **statuses**: *eq, in*  **taskTypeName**: *eq, in*  **taskName**: *eq*  **endBeforeTime**: *eq*  Supported composite operators are *and, or*  Example: taskTypeName eq \"DataSync\" and endBeforeTime eq 1762240800 (optional)
    limit := 250 // int32 | Max number of results to return. See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information. (optional) (default to 250) # int32 | Max number of results to return. See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information. (optional) (default to 250)
    offset := 0 // int32 | Offset into the full result set. Usually specified with *limit* to paginate through the results. See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information. (optional) (default to 0) # int32 | Offset into the full result set. Usually specified with *limit* to paginate through the results. See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information. (optional) (default to 0)
    count := true // bool | If *true* it will populate the *X-Total-Count* response header with the number of results that would be returned if *limit* and *offset* were ignored.  Since requesting a total count can have a performance impact, it is recommended not to send **count=true** if that value will not be used.  See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information. (optional) (default to false) # bool | If *true* it will populate the *X-Total-Count* response header with the number of results that would be returned if *limit* and *offset* were ignored.  Since requesting a total count can have a performance impact, it is recommended not to send **count=true** if that value will not be used.  See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information. (optional) (default to false)

    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    resp, r, err := apiClient.DataAccessSecurityAPI.GetTasksV1(context.Background()).Execute()
	  //resp, r, err := apiClient.DataAccessSecurityAPI.GetTasksV1(context.Background()).Filters(filters).Limit(limit).Offset(offset).Count(count).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `DataAccessSecurityAPI.GetTasksV1``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    // response from `GetTasksV1`: []TaskInfo
    fmt.Fprintf(os.Stdout, "Response from `DataAccessSecurityAPI.GetTasksV1`: %v\n", resp)
}

[Back to top]

list-data-dictionary-fields-v1​

List data dictionary fields Returns custom data dictionary fields that can be used when configuring identity collector field mappings and other permission-related settings. Built-in fields are not included in list responses; only custom fields created via Create Data Dictionary Field are returned. All listed fields have required: false.

API Spec

Path Parameters​

Other Parameters​

Other parameters are passed through a pointer to a apiListDataDictionaryFieldsV1Request struct via the builder pattern

NameTypeDescriptionNotes
filtersstringFilter results using the standard syntax described in V3 API Standard Collection Parameters Filtering is supported for the following fields and operators: dataDictionaryType: eq name: eq Supported composite operators are and
limitint32Max number of results to return. See V3 API Standard Collection Parameters for more information.[default to 250]
offsetint32Offset into the full result set. Usually specified with limit to paginate through the results. See V3 API Standard Collection Parameters for more information.[default to 0]
countboolIf true it will populate the X-Total-Count response header with the number of results that would be returned if limit and offset were ignored. Since requesting a total count can have a performance impact, it is recommended not to send count=true if that value will not be used. See V3 API Standard Collection Parameters for more information.[default to false]

Return type​

[]Datadictionaryfieldlistitem

HTTP request headers​

  • Content-Type: Not defined
  • Accept: application/json

Example​

package main

import (
	"context"
	"fmt"
	"os"
  
    
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    filters := `dataDictionaryType eq "Users" and name eq "Department"` // string | Filter results using the standard syntax described in [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters#filtering-results)  Filtering is supported for the following fields and operators:  **dataDictionaryType**: *eq*  **name**: *eq*  Supported composite operators are *and* (optional) # string | Filter results using the standard syntax described in [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters#filtering-results)  Filtering is supported for the following fields and operators:  **dataDictionaryType**: *eq*  **name**: *eq*  Supported composite operators are *and* (optional)
    limit := 250 // int32 | Max number of results to return. See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information. (optional) (default to 250) # int32 | Max number of results to return. See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information. (optional) (default to 250)
    offset := 0 // int32 | Offset into the full result set. Usually specified with *limit* to paginate through the results. See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information. (optional) (default to 0) # int32 | Offset into the full result set. Usually specified with *limit* to paginate through the results. See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information. (optional) (default to 0)
    count := true // bool | If *true* it will populate the *X-Total-Count* response header with the number of results that would be returned if *limit* and *offset* were ignored.  Since requesting a total count can have a performance impact, it is recommended not to send **count=true** if that value will not be used.  See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information. (optional) (default to false) # bool | If *true* it will populate the *X-Total-Count* response header with the number of results that would be returned if *limit* and *offset* were ignored.  Since requesting a total count can have a performance impact, it is recommended not to send **count=true** if that value will not be used.  See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information. (optional) (default to false)

    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    resp, r, err := apiClient.DataAccessSecurityAPI.ListDataDictionaryFieldsV1(context.Background()).Execute()
	  //resp, r, err := apiClient.DataAccessSecurityAPI.ListDataDictionaryFieldsV1(context.Background()).Filters(filters).Limit(limit).Offset(offset).Count(count).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `DataAccessSecurityAPI.ListDataDictionaryFieldsV1``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    // response from `ListDataDictionaryFieldsV1`: []Datadictionaryfieldlistitem
    fmt.Fprintf(os.Stdout, "Response from `DataAccessSecurityAPI.ListDataDictionaryFieldsV1`: %v\n", resp)
}

[Back to top]

list-identity-collectors-v1​

List identity collectors This endpoint lists the identity collectors in Data Access Security with optional filtering and pagination.

Sorting is not supported for this endpoint; supplying the sorters query parameter results in a validation error.

API Spec

Path Parameters​

Other Parameters​

Other parameters are passed through a pointer to a apiListIdentityCollectorsV1Request struct via the builder pattern

NameTypeDescriptionNotes
filtersstringFilter results using the standard syntax described in V3 API Standard Collection Parameters Filtering is supported for the following fields and operators: sourceId: eq type: eq, in id: eq, in Supported composite operators are and, or
limitint32Max number of results to return. See V3 API Standard Collection Parameters for more information.[default to 250]
offsetint32Offset into the full result set. Usually specified with limit to paginate through the results. See V3 API Standard Collection Parameters for more information.[default to 0]
countboolIf true it will populate the X-Total-Count response header with the number of results that would be returned if limit and offset were ignored. Since requesting a total count can have a performance impact, it is recommended not to send count=true if that value will not be used. See V3 API Standard Collection Parameters for more information.[default to false]

Return type​

[]Identitycollectorlistitem

HTTP request headers​

  • Content-Type: Not defined
  • Accept: application/json

Example​

package main

import (
	"context"
	"fmt"
	"os"
  
    
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    filters := `sourceId eq "2c9180835d2e5168015d32f890ca1581"` // string | Filter results using the standard syntax described in [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters#filtering-results)  Filtering is supported for the following fields and operators:  **sourceId**: *eq*  **type**: *eq, in*  **id**: *eq, in*  Supported composite operators are *and, or* (optional) # string | Filter results using the standard syntax described in [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters#filtering-results)  Filtering is supported for the following fields and operators:  **sourceId**: *eq*  **type**: *eq, in*  **id**: *eq, in*  Supported composite operators are *and, or* (optional)
    limit := 250 // int32 | Max number of results to return. See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information. (optional) (default to 250) # int32 | Max number of results to return. See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information. (optional) (default to 250)
    offset := 0 // int32 | Offset into the full result set. Usually specified with *limit* to paginate through the results. See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information. (optional) (default to 0) # int32 | Offset into the full result set. Usually specified with *limit* to paginate through the results. See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information. (optional) (default to 0)
    count := true // bool | If *true* it will populate the *X-Total-Count* response header with the number of results that would be returned if *limit* and *offset* were ignored.  Since requesting a total count can have a performance impact, it is recommended not to send **count=true** if that value will not be used.  See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information. (optional) (default to false) # bool | If *true* it will populate the *X-Total-Count* response header with the number of results that would be returned if *limit* and *offset* were ignored.  Since requesting a total count can have a performance impact, it is recommended not to send **count=true** if that value will not be used.  See [V3 API Standard Collection Parameters](https://developer.sailpoint.com/idn/api/standard-collection-parameters) for more information. (optional) (default to false)

    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    resp, r, err := apiClient.DataAccessSecurityAPI.ListIdentityCollectorsV1(context.Background()).Execute()
	  //resp, r, err := apiClient.DataAccessSecurityAPI.ListIdentityCollectorsV1(context.Background()).Filters(filters).Limit(limit).Offset(offset).Count(count).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `DataAccessSecurityAPI.ListIdentityCollectorsV1``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    // response from `ListIdentityCollectorsV1`: []Identitycollectorlistitem
    fmt.Fprintf(os.Stdout, "Response from `DataAccessSecurityAPI.ListIdentityCollectorsV1`: %v\n", resp)
}

[Back to top]

put-application-v1​

Update application by identifier. This endpoint updates an existing application in Data Access Security with the specified configuration.

API Spec

Path Parameters​

NameTypeDescriptionNotes
ctxcontext.Contextcontext for authentication, logging, cancellation, deadlines, tracing, etc.
idint64The unique identifier of the application to update.

Other Parameters​

Other parameters are passed through a pointer to a apiPutApplicationV1Request struct via the builder pattern

NameTypeDescriptionNotes

baseCreateApplicationRequest | BaseCreateApplicationRequest | Request body containing the updated details for the application. |

Return type​

(empty response body)

HTTP request headers​

  • Content-Type: application/json
  • Accept: application/json

Example​

package main

import (
	"context"
	"fmt"
	"os"
  "encoding/json"
    data_access_security "github.com/sailpoint-oss/golang-sdk/v3/data_access_security"
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    id := 12345 // int64 | The unique identifier of the application to update. # int64 | The unique identifier of the application to update.
    basecreateapplicationrequestJson := []byte(`{
          "adIdentityCollectorId" : 987654321,
          "applicationType" : 9,
          "nisIdentityCollectorId" : 192837465,
          "executeNow" : false,
          "name" : "HR File Server",
          "description" : "Stores HR documents and employee records.",
          "dataClassificationSettings" : {
            "isEnabled" : true,
            "clusterId" : "cluster-001"
          },
          "activityConfigurationSettings" : {
            "excludeFolders" : [ "/tmp", "/archive" ],
            "excludeFileExtensions" : [ ".log", ".bak" ],
            "excludeActions" : [ "delete", "move" ],
            "isEnabled" : true,
            "retentionTimePeriod" : 30,
            "retentionTimeType" : "days",
            "clusterId" : "cluster-001",
            "excludeUsers" : [ "user1", "user2" ]
          },
          "applicationCrawlerSettings" : {
            "calculateResourceSize" : 2,
            "excludedResources" : [ "resourceA", "resourceB" ],
            "crawlPublicFolders" : true,
            "excludedPathsByRegex" : "^/archive/.*",
            "isEnabled" : true,
            "crawlSnapshotsFolder" : true,
            "crawlMailboxes" : false,
            "crawlTopLevelShares" : [ "share1", "share2" ],
            "clusterId" : "cluster-001",
            "includeResources" : [ "resourceX", "resourceY" ]
          },
          "identityCollectorId" : 123456789,
          "permissionCollectorSettings" : {
            "analyzeUniquePermissions" : true,
            "calculateRiskiestPermissions" : false,
            "isEnabled" : true,
            "calculateEffectivePermissions" : true,
            "clusterId" : "cluster-001",
            "effectivePermissionsSource" : "S3"
          },
          "tags" : [ {
            "key" : 1,
            "value" : "Confidential"
          } ]
        }`) // BaseCreateApplicationRequest | Request body containing the updated details for the application.

    var baseCreateApplicationRequest data_access_security.BaseCreateApplicationRequest
    if err := json.Unmarshal(basecreateapplicationrequestJson, &baseCreateApplicationRequest); err != nil {
      fmt.Println("Error:", err)
      return
    }
    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    r, err := apiClient.DataAccessSecurityAPI.PutApplicationV1(context.Background(), id).BaseCreateApplicationRequest(baseCreateApplicationRequest).Execute()
	  //r, err := apiClient.DataAccessSecurityAPI.PutApplicationV1(context.Background(), id).BaseCreateApplicationRequest(baseCreateApplicationRequest).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `DataAccessSecurityAPI.PutApplicationV1``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    
}

[Back to top]

put-data-dictionary-field-v1​

Replace data dictionary field Fully replaces a custom data dictionary field. This is a PUT operation, not a partial update: the request body must contain the complete resource representation. Omitted properties are rejected. For custom fields, fieldType, dataDictionaryType, and required must match the current values; only name may change. Built-in fields where required is true cannot be updated.

List the field first with List Data Dictionary Fields to obtain the current representation before replacing it.

API Spec

Path Parameters​

NameTypeDescriptionNotes
ctxcontext.Contextcontext for authentication, logging, cancellation, deadlines, tracing, etc.
namestringThe current field name.

Other Parameters​

Other parameters are passed through a pointer to a apiPutDataDictionaryFieldV1Request struct via the builder pattern

NameTypeDescriptionNotes

updatedatadictionaryfieldrequest | Updatedatadictionaryfieldrequest | Complete data dictionary field representation used to fully replace the existing field. |

Return type​

Datadictionaryfieldlistitem

HTTP request headers​

  • Content-Type: application/json
  • Accept: application/json

Example​

package main

import (
	"context"
	"fmt"
	"os"
  "encoding/json"
    data_access_security "github.com/sailpoint-oss/golang-sdk/v3/data_access_security"
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    name := `Department` // string | The current field name. # string | The current field name.
    updatedatadictionaryfieldrequestJson := []byte(`{
          "name" : "Cost Center",
          "dataDictionaryType" : "Users",
          "fieldType" : "String",
          "required" : false
        }`) // Updatedatadictionaryfieldrequest | Complete data dictionary field representation used to fully replace the existing field.

    var updatedatadictionaryfieldrequest data_access_security.Updatedatadictionaryfieldrequest
    if err := json.Unmarshal(updatedatadictionaryfieldrequestJson, &updatedatadictionaryfieldrequest); err != nil {
      fmt.Println("Error:", err)
      return
    }
    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    resp, r, err := apiClient.DataAccessSecurityAPI.PutDataDictionaryFieldV1(context.Background(), name).Updatedatadictionaryfieldrequest(updatedatadictionaryfieldrequest).Execute()
	  //resp, r, err := apiClient.DataAccessSecurityAPI.PutDataDictionaryFieldV1(context.Background(), name).Updatedatadictionaryfieldrequest(updatedatadictionaryfieldrequest).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `DataAccessSecurityAPI.PutDataDictionaryFieldV1``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    // response from `PutDataDictionaryFieldV1`: Datadictionaryfieldlistitem
    fmt.Fprintf(os.Stdout, "Response from `DataAccessSecurityAPI.PutDataDictionaryFieldV1`: %v\n", resp)
}

[Back to top]

put-identity-collector-v1​

Replace identity collector Fully replaces an existing identity collector in Data Access Security. This is a PUT operation, not a partial update: the request body must contain the complete resource representation. Omitted or null top-level properties are rejected. After a successful request, a subsequent list request returns exactly the configuration that was sent.

Retrieve the current configuration with List Identity Collectors before replacing it. The sourceId and type cannot be changed and must match the current values.

API Spec

Path Parameters​

NameTypeDescriptionNotes
ctxcontext.Contextcontext for authentication, logging, cancellation, deadlines, tracing, etc.
idint64The unique identifier of the identity collector to replace.

Other Parameters​

Other parameters are passed through a pointer to a apiPutIdentityCollectorV1Request struct via the builder pattern

NameTypeDescriptionNotes

updateidentitycollectorrequest | Updateidentitycollectorrequest | Complete identity collector representation used to fully replace the existing resource. Partial updates are not supported. |

Return type​

(empty response body)

HTTP request headers​

  • Content-Type: application/json
  • Accept: application/json

Example​

package main

import (
	"context"
	"fmt"
	"os"
  "encoding/json"
    data_access_security "github.com/sailpoint-oss/golang-sdk/v3/data_access_security"
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    id := 12345 // int64 | The unique identifier of the identity collector to replace. # int64 | The unique identifier of the identity collector to replace.
    updateidentitycollectorrequestJson := []byte(`{
          "sourceId" : "2c9180835d2e5168015d32f890ca1581",
          "name" : "Active Directory Identity Collector",
          "groups" : {
            "fieldMappings" : [ {
              "sourceAttributeName" : "department",
              "fieldDictionaryName" : "UPTF-1"
            }, {
              "sourceAttributeName" : "department",
              "fieldDictionaryName" : "UPTF-1"
            } ],
            "properties" : [ "UserAddress", "department" ]
          },
          "type" : "Active Directory",
          "users" : {
            "fieldMappings" : [ {
              "sourceAttributeName" : "department",
              "fieldDictionaryName" : "UPTF-1"
            }, {
              "sourceAttributeName" : "department",
              "fieldDictionaryName" : "UPTF-1"
            } ],
            "properties" : [ "UserAddress", "department" ]
          }
        }`) // Updateidentitycollectorrequest | Complete identity collector representation used to fully replace the existing resource. Partial updates are not supported.

    var updateidentitycollectorrequest data_access_security.Updateidentitycollectorrequest
    if err := json.Unmarshal(updateidentitycollectorrequestJson, &updateidentitycollectorrequest); err != nil {
      fmt.Println("Error:", err)
      return
    }
    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    r, err := apiClient.DataAccessSecurityAPI.PutIdentityCollectorV1(context.Background(), id).Updateidentitycollectorrequest(updateidentitycollectorrequest).Execute()
	  //r, err := apiClient.DataAccessSecurityAPI.PutIdentityCollectorV1(context.Background(), id).Updateidentitycollectorrequest(updateidentitycollectorrequest).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `DataAccessSecurityAPI.PutIdentityCollectorV1``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    
}

[Back to top]

put-schedule-v1​

Update a schedule.

API Spec

Path Parameters​

NameTypeDescriptionNotes
ctxcontext.Contextcontext for authentication, logging, cancellation, deadlines, tracing, etc.
idint64The unique identifier of the schedule to update.

Other Parameters​

Other parameters are passed through a pointer to a apiPutScheduleV1Request struct via the builder pattern

NameTypeDescriptionNotes

updateScheduleRequest | UpdateScheduleRequest | |

Return type​

(empty response body)

HTTP request headers​

  • Content-Type: application/json
  • Accept: application/json

Example​

package main

import (
	"context"
	"fmt"
	"os"
  "encoding/json"
    data_access_security "github.com/sailpoint-oss/golang-sdk/v3/data_access_security"
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    id := 1001 // int64 | The unique identifier of the schedule to update. # int64 | The unique identifier of the schedule to update.
    updateschedulerequestJson := []byte(`{
          "scheduleTaskName" : "Daily Data Sync",
          "scheduleType" : "Daily",
          "active" : true,
          "interval" : 1440,
          "startTime" : 1762237200,
          "endTime" : 1762240800,
          "taskTypeName" : "DataSync",
          "daysOfWeek" : [ "Monday", "Wednesday", "Friday" ],
          "applicationId" : 2001,
          "runAfterScheduleTaskId" : 1000
        }`) // UpdateScheduleRequest | 

    var updateScheduleRequest data_access_security.UpdateScheduleRequest
    if err := json.Unmarshal(updateschedulerequestJson, &updateScheduleRequest); err != nil {
      fmt.Println("Error:", err)
      return
    }
    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    r, err := apiClient.DataAccessSecurityAPI.PutScheduleV1(context.Background(), id).UpdateScheduleRequest(updateScheduleRequest).Execute()
	  //r, err := apiClient.DataAccessSecurityAPI.PutScheduleV1(context.Background(), id).UpdateScheduleRequest(updateScheduleRequest).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `DataAccessSecurityAPI.PutScheduleV1``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    
}

[Back to top]

start-task-rerun-v1​

Rerun a DAS task. This end-point sends a request to re-run a task in Data Access Security.

API Spec

Path Parameters​

NameTypeDescriptionNotes
ctxcontext.Contextcontext for authentication, logging, cancellation, deadlines, tracing, etc.
idint64The unique identifier of the task to rerun.

Other Parameters​

Other parameters are passed through a pointer to a apiStartTaskRerunV1Request struct via the builder pattern

NameTypeDescriptionNotes

Return type​

(empty response body)

HTTP request headers​

  • Content-Type: Not defined
  • Accept: application/json

Example​

package main

import (
	"context"
	"fmt"
	"os"
  
    
	sailpoint "github.com/sailpoint-oss/golang-sdk/v3"
)

func main() {
    id := 1001 // int64 | The unique identifier of the task to rerun. # int64 | The unique identifier of the task to rerun.

    

    configuration := sailpoint.NewDefaultConfiguration()
    apiClient := sailpoint.NewAPIClient(configuration)
    r, err := apiClient.DataAccessSecurityAPI.StartTaskRerunV1(context.Background(), id).Execute()
	  //r, err := apiClient.DataAccessSecurityAPI.StartTaskRerunV1(context.Background(), id).Execute()
    if err != nil {
	    fmt.Fprintf(os.Stderr, "Error when calling `DataAccessSecurityAPI.StartTaskRerunV1``: %v\n", err)
	    fmt.Fprintf(os.Stderr, "Full HTTP response: %v\n", r)
    }
    
}

[Back to top]